I've been alone for some time. I thought I got used to it but.. I didn't.

Met an individual like a needle in a haystack. Someone whose tracing the same steps I once took. We learned that we have a lot of similarities so I was growing fond of this friendship.. so much that I looked past the one-sidedness of it all. While she certainly was curious about the things she was interested about me..She was never really curious about me.

I felt the lopsidedness of all the conversations and everything, yet I still instigated conversations with her. And when the conversation dried up along with her interest, it was me and my mental health going crazy. Anxiety, thoughts of worthlessness, abandonment. When in reality they never really cared that much for me in the first place and it was entirely foolish of me to invest so much into a person that wouldn't reciprocate.

Sigh...

I am focusing my attention into more productive areas..

Thing are just so far away or things that I'm interested in doesn't exist. People don't exist here, just cars.

I don't have enough time to volunteer after work either.

It's just too difficult to meet people these days.

cross-posted from: https://lemmy.sdf.org/post/39759212

crosspostato da: https://lemmy.sdf.org/post/39759210

Archived

German prosecutors and customs investigators have raided the premises of a machine tool manufacturer near Munich. The company is suspected of supplying more than 20 high-precision machines worth approximately €5.5 million to Russia in violation of European Union sanctions. Three company employees have been formally charged. Raids were also carried out in Baden-Württemberg and Bulgaria.

According to an investigation by Süddeutsche Zeitung, the company in question is Spinner, based in Sauerlach, a town just outside Munich. Spinner manufactures machine tools at various sites, including near Stuttgart, as well as in Bulgaria and Turkey.

In connection with the investigation, a Spinner machine subject to export restrictions was confiscated in mid-February 2025. Export documents indicated that the machine was supposed to leave Germany in August 2023, traveling through Poland and Belarus on its way to Uzbekistan. Investigators suspect the machine was in fact delivered to a Russian company affiliated with the manufacturer. There is also evidence of additional deliveries through Turkey and China.

The Munich prosecutor’s office cited a detailed report that aired in late April on the TV channel Arte, which traced the export of a Spinner machine to Russia via third countries — allegedly with the use of falsified documents. In the Arte report, one of the company’s three managing directors, Nikolaus Spinner, denied the allegations, claiming the machine had been sold to an Uzbek agricultural equipment manufacturer. However, a manager at the Uzbek company told reporters by phone that no such purchase had taken place.

[...]

https://www.congress.gov/bill/119th-congress/house-bill/1/text

1118 pages with no chapter links...

html version has links but why not the PDF??!?!?

There's so much untapped potential with a probing system and macros that aren't being utilized at all.

This video demonstrates how powerful a quality machine and probing can be towards a future of automation and simplifying incredibly difficult setups.

What gets me unsettled but also inspired is... This isn't entirely limited to the machine tool or probing system demonstrated on the video. We can do this NOW. Existing machines are entirely capable of exploiting their probing systems beyond their usual simplistic usage (part pickup, measurement). And the only thing really lacking is the brains to figure out all the heavy duty math.

I thought this was an extremely insightful documentary about why "Made in Japan" speaks volumes about quality versus the "Made in USA" counterpart. We as machinists are an intimate and integral component to the quality chain. Look around you, Japanese machines and tools dominate the precision market. Okuma, Yasda, Makino, Mazak, Mitsui-Seiki, dmg Mori (the Mori Part at least). While All American brands with the exception of Hardinge are left as a 'value' brand.

I never really liked the phrase "it's good enough". It always gives the impression to me that they've never really had to put something together and have it perform. I hear this all too much in job shops that make parts rather than assemblies. Never in Tool & Die. Sure, the component has a .010" tolerance but if the machinist was to hold everything within .001 or less, it makes assembly work a lot more consistent and predictable.

The linked video is part 2 of a 3 part video series.

Here is part 1 youtube

part 3 youtube

So what's your thoughts on quality? Does the shop you work at feel like they value your effort towards quality?

Roders are some impressive machines. Wonder what kind of accuracy the machine is capable at that velocity.

Image originates from this video by OSG..

https://www.youtube.com/watch?v=u286ZNupi8M

The material being cut is PEEK Glass-Fiber 30%. It looks like it's fixtured to a Delrin block some how.. Any ideas on this black magic?

Glue? Threaded from the bottom up?

Running into a dilemma...

I have no trouble ending up with an accurate finished part with really tricky features.

BUT...BUT I can't figure how to quickly develop a roughing strategy. I'm always doing short run items so I don't have many opportunities to be hogging out material repeatedly. So, when I get a 1pc job that needs a lot of material removed, I'm very slow.

To a point, where I'm getting micromanaged.... on roughing.

I'm inclined to be safe and prioritize process stability over Material removal rate. For example in HEM, Instead of doing 10% stepovers, i'll do 6%. In turning, I'll keep DOC down on the bottom left end of recommended specs instead of burying past the insert radius. I don't get off on huge MRR like others, my moment of glory is hitting incredible tolerances on a difficult design/material.

What really scares me is... that a mistake in roughing parameters comes with bigger risk than just "tighten the bolt until it loosens up and quarter turn back". It's the part becoming a projectile/scrap, machine damage, and at worst an injury. Lathe work where I have only a fraction to hold onto and inches of material to remove....

How have you developed a 'sense' for how aggressively you can rough?

![email protected]

![email protected]

Following the prior Lemmy post about towels...

I wash once a week, is that sufficient or need I more frequency?

6.875" x 5"

I used to lug the shipping crate of a case around but I needed all the space I can get in my toolbox. Also tried to make this a one-handed design. Press down into the cavity with my pinky and pick up what I need with the index and thumb.

https://www.printables.com/model/657221-compact-organizer-for-6-machinist-parallels

I'll be keeping this one in my toolbox of "out of the box" solutions.

I'm in a situation with my manager who is suggesting that clock-in starts when the employee arrives to the site of work. Effectively saying that everyone should be coming in 15 minutes earlier than their start time.

The majority of what I read online was about security checks when leaving the premises instead of entering. And the results of a couple class actions seem like the law has loose interpretation.

Wondering what your experiences have been like dealing with this situation. Are you paid for your time traveling on company premises?

For ref this takes place in California.

Only 4 geometries to grind on a broken carbide endmill shank and you can drill out hardened steel.

Inspired by Sandvik hardcut and OSG tap extracting drills

https://www.amazon.com/dp/B0055860LA

https://www.osgtool.com/exocarb-xh-drl-drills-5172

Nandert is in my opinion the best channel for Los Angeles county metro projects.

Makino makes very informative presentations