I've been donating $5/month to Signal forever. In 2022, I switched from my previous donation method (Patreon? can't remember) to donating via the app so I would get the badge.

Recently, Signal has started offering $1.99 for 100 GB of backups. Has anyone who previously donated like I have "upgraded" to this plan? Did it replace your existing donation or was it added to the donation? Did it affect your badge?

I've searched but I really couldn't find anything on this. I feel like the Signal Foundation might have done a better job communicating how this would work to their most loyal supporters. 🤷🏻‍♂️

As glitches go, I thought this was pretty cool. Let's just say that I was in the right headspace for psychedelic colors. This happened to me last night on Bazzite Nvidia. It lasted for a few minutes, but before I could think to take a picture, it corrected itself. Must be a game issue if it is also happening on PS5. The only reference I could find online was this reddit post. May be HDR related. https://old.reddit.com/r/BaldursGate3/comments/1kbqqn4/weird_color_issue_on_ps5_since_dleding_patch_8/

This is a beautifully written and incisive article that I chanced upon this evening. I don't know how we happened on the subject of the film, but my wife wondered aloud if there was a chance that the diva's performance was authentic, meaning voiced by a single person in real time. To my knowledge, there's no way for a human to be polyphonic to the extreme degree of the diva, but I tried to dig up some info on the subject anyway, eventually coming across this lovely piece. I hope you'll find it, as I did, an brief respite from the terrible reality in which we find ourselves. ✌️

You'd think we'd have come up with a better system in the last twenty years. 😆

I've been meaning to cancel online for two years. Went on the web site tonight and spent 30 minutes trying to turn this off. The cancel link takes me to a page with two sections, one where I can apparently buy vouchers (whatever they are) and the other just says I have a subscription. No option to turn off auto renewal. Talk about dark patterns. Any suggestions?

Edit: OK, whew. Took me two hours but I finally got it. Had to do it on the eShop on the Switch, which I didn't want to do because I knew I'd have to put in my new WiFi password and then run updates before it'd let me do anything.

This was not a good experience. Very hostile.

Thanks to all who tried to help. ✌️

We know now that you can't turn "base metals" into gold through chemical processes, but if you could, gold would no longer be scarce and therefore no more valuable than the base metals.

I was looking at the RTX 5090 listings on NewEgg and the last picture (7/7) on this MSI card is a thing I don't recognize. Anyone know what it is?

This started a couple days ago. I tried clearing the browser cache, which did not change the behavior. The counts show up normally in the Lemmy UI. My slrpnk account is my only Lemmy account so I have no visibility as to whether this is an issue on other instances.

TL;DR: Beware! Tried to send 32 tabs from Windows VM browser instance to Fedora browser instance. Entire VM crashed then browser process on Linux host crashed.

Before winter break I virtualized a Windows PC and set it up as a KVM/QEMU guest on Fedora running on the same hardware. Got IOMMU/Vfio passthrough working on guest. Loving the near-native performance. Seems really solid. Left it running continuously for several days, compiled multiple projects. Got over a week of usage with VM and had no issues.

Set up a new Firefox account for work to accommodate new workflow. Set it up to only sync certain items, but I forget which. Can't tell from account management page. Logged in on browser instances on both host and guest. I'd accumulated some tabs on guest instance that I wanted to bookmark on host instance. Tried a single tab using Send Tab to Device. Worked fine. Selected all tabs, did Send 32 Tabs to Device. Tabs appeared on host instance, appeared to be loading. Then my external monitor went black. VM had crashed. Browser instance on host stopped responding moments later, then closed itself after a brief time.

Both host and guest running 133.0.3. Host instance was installed from flatpak.

Nothing notable in Windows System log except for the usual "previous system shutdown was unexpected" EventLog and Kernel-Power events.

Edit: Was able to reproduce the VM crash with only 10 tabs. At 20 tabs, the VM crashed and the host browser process died as in the original incident.

"You are receiving this email because this is an important message regarding your account and products you are using. You are not allowed to unsubscribe from this type of message."

Edit: To all the concern trolls who think the contents of the email is important context as to whether I'm allowed to be annoyed or not, understand that I am not Atlassian's customer. We have zero active licenses for any Atlassian products.

Final edit: I got all the Linux stuff right but made a dumb mistake generating the image on the Windows side. Watching the VM boot right now. Thanks to all for your support!

cross-posted from: https://slrpnk.net/post/15860280

Contemplating Fedora Kinoite for work daily driver. Need to prove that I can virtualize an existing physical Windows 11 machine. Using Bazzite on a personal laptop as a host test bed.

Test host seems to be set up correctly. I layered the packages in the virtualization group, layered virtio-win (from downloaded rpm package), added my user to the libvert group, and enabled libvirtd. After a reboot or two, I can connect with the Virtual Machine Manager and define my VM.

On physical machine I used Disk2vhd to generate a vhdx. Moved that file to the test host and converted to qcow2. Copied disk image to /var/lib/libvert/images and added it as my drive image when I defined the VM.

VM starts but will not boot. Stupid question: Should I have installed virt-win-gt-x64.msi from the virtio-win ISO on the source Windows install before I created the vhdx?

Edit: Since I posted, I installed a Debian guest from scratch in this environment and it runs like a champ. 👍

Final edit: I got all the Linux stuff right but made a dumb mistake generating the image on the Windows side. Watching the VM boot right now. Thanks to all for your support!

cross-posted from: https://slrpnk.net/post/15860280

Contemplating Fedora Kinoite for work daily driver. Need to prove that I can virtualize an existing physical Windows 11 machine. Using Bazzite on a personal laptop as a host test bed.

Test host seems to be set up correctly. I layered the packages in the virtualization group, layered virtio-win (from downloaded rpm package), added my user to the libvert group, and enabled libvirtd. After a reboot or two, I can connect with the Virtual Machine Manager and define my VM.

On physical machine I used Disk2vhd to generate a vhdx. Moved that file to the test host and converted to qcow2. Copied disk image to /var/lib/libvert/images and added it as my drive image when I defined the VM.

VM starts but will not boot. Stupid question: Should I have installed virt-win-gt-x64.msi from the virtio-win ISO on the source Windows install before I created the vhdx?

Edit: Since I posted, I installed a Debian guest from scratch in this environment and it runs like a champ. 👍

Final edit: I got all the Linux stuff right but made a dumb mistake generating the image on the Windows side. Watching the VM boot right now. Thanks to all for your support!

Contemplating Fedora Kinoite for work daily driver. Need to prove that I can virtualize an existing physical Windows 11 machine. Using Bazzite on a personal laptop as a host test bed.

Test host seems to be set up correctly. I layered the packages in the virtualization group, layered virtio-win (from downloaded rpm package), added my user to the libvert group, and enabled libvirtd. After a reboot or two, I can connect with the Virtual Machine Manager and define my VM.

On physical machine I used Disk2vhd to generate a vhdx. Moved that file to the test host and converted to qcow2. Copied disk image to /var/lib/libvert/images and added it as my drive image when I defined the VM.

VM starts but will not boot. Stupid question: Should I have installed virt-win-gt-x64.msi from the virtio-win ISO on the source Windows install before I created the vhdx?

Edit: Since I posted, I installed a Debian guest from scratch in this environment and it runs like a champ. 👍

Cooler didn't arrive until after dinner. If I were twenty years younger I'd have stayed up all night. 😆

As I suspect a lot of people are doing, I'm going to keep using my existing graphics card until RTX 5000 series drops in January. Everything else is new, though. First build in seven years.

Now watch the stuff not show up until Tuesday. 😆

Edit: It did arrive today (11/22). Woohoo! Still a weird email. This was NewEgg. Amazon has done this to me as well, but they usually say it's coming early then the shit arrives on the original day (at that point "late") haha. Anyway, have a nice weekend. Hail Satan!

Checkmate, Chuck. 👑

Edit: Given the number of downvotes I'm getting, I'm guessing a lot of people have just learned that they've been pronouncing St. John wrong. Don't beat yourselves up. It's not like it's a terribly common name.

Had to install this app which then made me sign in (using my work PC) to update the firmware on my damn controller. Wish there was a way to do this in Linux. I'm so over Microsoft's crap.

Guest OS is Debian 12.7, no desktop environment. VM was created with Powershell so that I could specify the Configuration Version (9.0). This VM is intended to be migrated to a Server 2019 host.

I have a series of checkpoints so I can observe the behavior at each. After installing (rootfull) docker, VM memory demand idles around 526 MB. Starting a session and running top doesn't change the memory demand at all.

When I start with the checkpoint where I've made docker rootless, memory demand idles slightly higher before login, maybe 870 MB. When I start a session and run top, though, memory demand skyrockets and assigned memory quickly reaches max dynamic memory, 4096 MB. The output in top barely changes. For giggles I bumped the max to 6 GB and demand still continued to rise.

There are no containers defined in either case. Any ideas about what I'm seeing?

I've been experimenting with going without the suggestion strip on my Android keyboard because I tend to hit that row (and a random unwanted word) occasionally on my relatively new Moto when thumb typing. This can cause problems in FF as it did for me today when I was writing a long-ish comment and accidentally hit the reading mode button in the right of the address bar (I have my address bar at the bottom) and of course flushed my comment to hell. It was a perfect storm of shit haha.

Might move to nightly so I can disable the reading mode button, assuming that's still possible. I've been on Android released for the last year or so.

Edit: BTW this happened on the photon front end. Not sure if you could run into this with default Lemmy. Edit #2: In first paragraph, I used both the terms "comment" and "post". I was referring specifically to commenting. Haven't noticed the reading mode button be available when writing a whole new post, but I comment more than I post.

Any other "gotchas" that you guys have encountered on mobile FF?