I think I checked the e-steps when I upgraded the extruder (been I while, I don't remember) but I can check again

I hadn't heard of tightening the nozzle while hot, but I'll definitely give that a try

This is the first print I've done after removing and thoroughly cleaning the nozzle, unclogging the hot end, and adjusting the extruder clamping force. Guess it could be that the bed needs leveling, I haven't checked it in a while.

Honestly starting to think this blue filament is cursed, something goes wrong every time I use it. (I do dry it thoroughly every time I take it out of storage)

Not entirely sure what "cold pull" means. I unscrewed the nozzle while the machine was powered off and the hot end was room temperature. Blasted the living hell out of the nozzle with a small torch, scrubbed it inside and out with a brass bristle brush, ran one of the bristles through the end of the nozzle. With the nozzle and ptfe out, I heated the hot end to 60 C to loosen the remaining chunk of filament and pushed it out the bottom with the handle of a needle file. It came out in one solid piece. Shined a light through both hot end and nozzle individually and it looked clear.

Number three will get you through most all fences, walls, and locked doors. Become ungovernable.

This is rpm erasure

![email protected]

Upon further analysis:

Command: [Pity SUV drivers], who are quickly being priced out of their [badges of [contempt for the planet]]

winrar wrote this

https://en.m.wikipedia.org/wiki/The_Family_International#Loving_Jesus

"Loving Jesus" is a term TFI members use to describe their intimate, sexual relationship with Jesus. TFI describes its "Loving Jesus" teaching as a radical form of bridal theology. They believe the church of followers is Christ's bride, called to love and serve him with wifely fervor; however, this bridal theology is taken further, encouraging members to imagine Jesus is joining them during sexual intercourse and masturbation. Male members are cautioned to visualize themselves as women, in order to avoid a homosexual relationship with Jesus.

Blakeslee claimed he was not targeting anyone with his antics but had a habit of placing his waste in Pringles cans and randomly throwing them from his car as he traveled down the road.

I guess that's... better?

They said "free" and I elected to interpret that in the way that allowed me to make a little joke

Ive been on the phone for an hour and they wont let me fucking cancel

Linux users, and people who have not yet become linux users

Yea i can ses the similarities, but i keep trying to swipe on things and it doesnt do anything

Sync for lemmy is coming and ill probably jump back to that, especially if its open source. Else i hope the jerboa folks take some more design cues from the other apps to make the whole ux feel a bjt quicker/easier

As an engineer, i dont know how to feel about this. On the one hand, 19.99999 = 20. But on the other hand, 3^3 - 3 = 24.

Also, get a sleep study for sleep apnea. "It is estimated to affect 10% to 30% of adults in the United States but in many cases goes undiagnosed". -National Sleep Foundation

I keep trying to understand that headline but I just can't parse it

Most modern "plotters" are just bigass printers. The word used to only mean pen-based vector-drawing machines, but the overlapping use in architechture and engineering meant that as cheap inkjets supplanted the pen plotters they co-opted the name.

I've got a thunderbolt chip on an AMD motherboard, which doesn't usually happen, and I'm running an LG 5k monitor through it. I use an IBM model M over native PS/2. I've got a Ryzen 7, but a GTX 1060 cuz it still works. It's running Ultramarine Linux, based on Fedora.