Spyke

Posts

solardiy·SolarDIYbyDequei

Help with JK BMS and Victron

Hello. I recently bought an off-grid house with its own solar system. So I'm learning little by little. Right now, I have a Voltronic Axpert VMIII inverter connected to two battery banks. These battery banks have 16 batteries each, totaling 32 batteries (LiFePO4). Each bank has a BMS model JK B2A20S20P. There is no communication between this inverter and the BMS; everything works based on voltages, meaning I have told the inverter what voltage it should have. I am going to upgrade my installation with more panels, a Victron MultiPlus-II 48/10000/140-100 inverter, a Victron Cerbo GX MK2, a VICTRON MPPT 250/100-Tr VE.Can, a VICTRON MPPT 250/70-Tr VE.Can, and some other things that I don't think are important right now. My doubts arise about whether it will be possible to connect the BMS of the battery banks to the Victron system so that it can manage the batteries correctly, or if it is better to buy new BMS that do allow this. What do you think?

If I should buy a new BMS, which one do you recommend for this case?

Thank you very much!

Edit: Added type of batteries Edit2: I'm from Spain

View original on sopuli.xyz
lineage_os·Lineage OSbyDequei

Trick the Kia Connect app into not knowing that the phone is rooted

Hello. I have a Xiaomi Mi Mix 2S with LineageOS, rooted with Magisk. When I open the Kia Connect app, it tells me that I cannot use it because my phone is rooted. In Magisk, I have the Play Integrity Fix module and Zygisk Assistant installed. What I usually do when this happens is mark the app in the Magisk deny list, but even when I do that for this app, it still detects the root. How can I fix this? Thank you very much.

View original on sopuli.xyz
general·General DiscussionbyDequei

Concerns About Tight Layover: Valencia to Tokyo via Air France

cross-posted from: https://sopuli.xyz/post/16201582

Hello, I hope this is the right community to ask this. I have a flight in December from Valencia (Spain) to Tokyo with Air France. I have a layover in Paris CDG.

The flight from Valencia to Paris arrives at CDG at 08:20 in terminal 2G. And the flight from Paris to Tokyo departs at 9:30 in terminal 2E.

I have been researching and I believe that this is not enough time to make the connection. I contacted Air France and initially they told me that it was not enough time, and they offered me some more expensive alternative flights, which I am not satisfied with, as I would arrive a day later. When I told them that their website states that they are responsible for making the connection possible, they started to say that the connection is indeed possible. I also tried to cancel the flight from Valencia to Paris and take another airline that arrives earlier, but they say that cannot be done without paying, as it is part of the same itinerary.

I don’t have much experience flying, and I would like to know your opinion.

Thank you very much!

View original on sopuli.xyz
aviation·AviationbyDequei

Concerns About Tight Layover: Valencia to Tokyo via Air France

Hello, I hope this is the right community to ask this. I have a flight in December from Valencia (Spain) to Tokyo with Air France. I have a layover in Paris CDG.

The flight from Valencia to Paris arrives at CDG at 08:20 in terminal 2G. And the flight from Paris to Tokyo departs at 9:30 in terminal 2E.

I have been researching and I believe that this is not enough time to make the connection. I contacted Air France and initially they told me that it was not enough time, and they offered me some more expensive alternative flights, which I am not satisfied with, as I would arrive a day later. When I told them that their website states that they are responsible for making the connection possible, they started to say that the connection is indeed possible. I also tried to cancel the flight from Valencia to Paris and take another airline that arrives earlier, but they say that cannot be done without paying, as it is part of the same itinerary.

I don’t have much experience flying, and I would like to know your opinion.

Thank you very much!

View original on sopuli.xyz
firefox·FirefoxbyDequei

Buggy trading charts

Hello. If I drag the mouse on the trading charts, everything is filled with lines. Except for the part of the graph, I understand that it is because it is updated at all times. This does not happen with a Chromium browser and happens even if all extensions are disabled. Does anyone have this same problem? Thank you

View original on sopuli.xyz

You reached the end