Who comes up with this stuff ?

Guess I’m continuing to use Firefox in hell then

Geekbench is pretty useless for actual performance comparisons.

Not sure how it could help me solder or find faults on PCBs.

Don’t post links Otherwise comments get deleted very quick

That would be recognized as a link

Meanwhile the base version costs 39995€ here

One terminal 35% stake It’s still not great but let’s not blow things out of proportions.

You can try Faugus Launcher

I don’t get it

Achso nein das habe ich dann falsch verstanden. Man kann Verkehrslage als Overlay hinzufügen, aber es wird nicht für die Routenplanung eingerechnet.

That seems strange I’m running a pfSense VM on proxmox with a Core i3 5010u. The VM has 2 cores and 1GB ram and I’m getting around 500 Mbit on my Gigabit cable in download. I only disabled hardware checksum on the pfSense side. What CPU exactly do you have? Also make sure to set the CPU type for the OPNsense to „host“. That helped quite a bit for me.

An now explain how to setup Kerberos

Ahh thanks I didn’t make the connection between burger and Bürger.

I did something similar. I used Proxmox and then installed PfSense as a virtual machine. You might want to look into OPNsense and PfSense. There are addons for both that do the same as AdGuard and are free and open source. I had good experiences with pfBlocker

Dumb question:

If I have a zfs mirror I created with a ZFS 2.1 kernel, do I need to recreate it in order to take advantages of 2.2 features like overlay support ?

I really would advise against a raspberry. Even a Pi 4 is too slow for transcoding and storage over usb is just too unreliable. I would go with a motherboard with integrated CPU. There is a really good one from Topton with a Celeron N5105 that supports hardware transcoding. I did a build with that recently and I’m really happy with it so far. Power consumption is around 35W with two 18TB sata drives. If you only use one and have it go to standby when not in use you could go even lower.

If you want something prebuilt there is a NAS from terramaster with the same cpu. It uses a an internal USB for OS storage that’s easily replaced. It’s called F2-423.

Yeah on that specific board it looks like it’s included . I was just going from experience. I just wired such a sensor to an Arduino the other day and I was having problems without the pull up. I was seeing garbled data packets on the data line.

edit: you can easily confirm this by measuring the resistance between VCC and Data on the sensor.

Was spricht gegen OsmAnd ?

Ich weiß die Routenplanung dauert etwas weil halt offline aber damit kann man find ich leben

You’re not missing much. Until VW gets a grip on their software I wouldn’t touch any of their current models.