kshowerthoughts·Showerthoughtsbykholby Buttholes are 3D printers.View original on lemmy.world144Comments34Reply
HHadriscus jlai.lu3Hide 3 repliesThey're just the nozzle, right? I'd say the body attached to it is the printer, and a good fiber diet is the filament40Reply
MMunkisquisher replylemmy.nz2Hide 2 repliesTried installing a 0.4mm nozzle, now I have a hernia from pushing14Reply
MMunkisquisher replylemmy.nzYeah, but my setup wobbles too much so the VFAs were terrible. Pressure advance wasn't well tuned either.4Reply
nneidu3 sh.itjust.works1Hide 1 replyNot only that, but you can buy different nozzle shapes for that extra flair. (Courtesy of turdtwister.com, although that site seems to be gone nowadays)27Reply
RRonguaki lemmus.org3Hide 3 repliesMine seems to run a little cold, get a lot of layer separation.17Reply
RRonguaki replylemmus.orgYour question requires testing. I'll get back to you with my fiber and hydration settings5Reply
SharkAttak kbin.melroy.org3Hide 3 repliesAnd like real 3D printers, some "extruders" are really hot.8Reply
ssurewhynotlem replylemmy.world2Hide 2 repliesInstructions unclear. How to remove PLA from urethra?7Reply
TrickDacy replylemmy.world5Hide 5 repliesI don't know about you but I'm not creating a 2 image with my turds.6Reply
MinnesotaGoddam replylemmy.world4Hide 4 replieswriting your name in the snow is more fun in brown ink1Reply
ccuboc lemmy.worldI refer to my wife as a 3D printer. After all, she is the mother to my children.6Reply
SSiblingNoah piefed.socialDon’t you just hate being out and about, need a toilet, and there’s a DRM lock? Why I only support open source Klipper now.3Reply
34 replies
So did we all, buddy. So did we all.
They're just the nozzle, right? I'd say the body attached to it is the printer, and a good fiber diet is the filament
Tried installing a 0.4mm nozzle, now I have a hernia from pushing
Were you able to achieve a satisfactory resolution?
Yeah, but my setup wobbles too much so the VFAs were terrible. Pressure advance wasn't well tuned either.
Not only that, but you can buy different nozzle shapes for that extra flair.
(Courtesy of turdtwister.com, although that site seems to be gone nowadays)
I feel like I’ve just had too much internet for one day.
What a day to know how to read.
Mine seems to run a little cold, get a lot of layer separation.
How many layers can you even coil?
Your question requires testing. I'll get back to you with my fiber and hydration settings
You are printing from too far away.
I'd say more extruders but I'll give it to you.
I’ll never think of the word extruder the same again
Shitposting without technically shitposting. Well done!
While you're in the shower don't forget to clean your printer.
And like real 3D printers, some "extruders" are really hot.
Instructions unclear. How to remove PLA from urethra?
PSA, don't home-make catethers.
You weren't supposed to do a cold pull.
I've never been able to get mine to work over wifi.
By that definition all printers are also 3D printers.
I don't know about you but I'm not creating a 2 image with my turds.
writing your name in the snow is more fun in brown ink
my ui doesn't render that (it's the web UI)
you got to work with what the devil gave you
I refer to my wife as a 3D printer. After all, she is the mother to my children.
You know mine became a spray paint can after eating a salad last month.
Organic 3D printers.
Don’t you just hate being out and about, need a toilet, and there’s a DRM lock? Why I only support open source Klipper now.
This made my day.