The 2X part means the DVD drive could read DVDs at up to 2X speed

Hot Wheels has Marvel series of cars too and took picture of this "well known" one recently.

For the OS side a few ways.

• Clone & then rename+change drivers
• Ansible/chef
• NixOS

For home folder side of things a dotfile manager, cloud services, and file sync tool will take care of most things. I use chezmoi for dotfiles & nextcloud for file syncing. Firefox is only cloud synced service I still use for now. I have yet to find any decent sources of information on dotfiles so gonna be stuck going through those stupid things to figure out what you want to sync.

Software config optimizations help a little bit but my biggest improvement was moving the DB to SSD. Spinning disks are great for capacity but not for DB performance. Random I/O is a big factor for them and those drives drop in performance so fast for that type of I/O due to physically spinning media.

I started out using Owncloud and later switched to Nextcloud once that fork was stable. For all my uses it has always needed beefy hardware to run well but I definitely have way more junk files in synced folders than I should & rarely clean things up.

I have never seen a capture device with USB interface have any kind of usable latency, you'll want one with PCI Express interface.

Elgato makes a capture card with PCI Express interface, I had a friend who used one to play all of his consoles on big virtual screen in VR. I tried out Mario Kart 8 for the Switch and it played great.

Yep, 8th gen (Coffee Lake) saw a lot of improvements in Intel Quick Sync, https://en.wikipedia.org/wiki/Intel_Quick_Sync_Video#Hardware_decoding_and_encoding

The OS was also very limited with focus on Linux ports of games which there were not very many at the time. Proton wasn't a thing yet. I bought two of them, one for myself and one for my brother. I tested it out & it was neat but wiped both to do clean installs of Windows 7 so could play the games we wanted.

Nothing to stop running podman containers with full root access by creating & running them as root, you run them as whatever user you want. I've done it to troubleshoot containers on more than one occasion, usually when I want to play with VPN or privileged ports but too lazy to do it proper. The end goal for a lot of ppl, including myself, is to run as many things as non-root as possible. Why? Best practices around security have you give a service the minimal access & resources it needs to do it's tasks. Some people allow traffic from the internet to their containers & they probably feel a little bit safer running those programs as non-root since it can create an extra layer that may need to be broken to fully compromise a system.

There's a feature to allow charging from USB ports while a computer is off, Lenovo calls it "Always on USB." That feature is constantly using power even when nothing is plugged in. To test if any ports have that feature power off the computer then try plugging in a simple 5v 500ma usb device to charge. If it starts charging then it has that feature and will drain power. If no options to disable in BIOS then as far as I know stuck :(

I've worked on a couple recent gen refurb laptops (dell and lenovo) with that feature but lacking any disable option in BIOS. I've tried to get into the habit of plugging in whenever not being used but still end up with things empty more often than I like. Very frustrating and I think only hope is future bios update to give that option.

Sounds like the drives are combined with RAID 5. Could be hardware RAID card or software RAID as part of the BIOS. Server model number can be used to search for administrator manual and may have more info there. If it's hardware RAID card then try to find the model number & search for it's manual. If it's software raid at the BIOS level then motherboard/server manual will cover it. Should be some messages and prompts during boot related to it. Terms to look for 'RAID', 'storage controller', 'Perc', 'LSI'.

Intel Quick Sync video saw a lot of improvements on 8th gen & since it's all so old the pricing differences between 7th & 8th gen are going to be negligible.

I suggest to read up on the way Wake On Lan works, it's pretty neat. it has to send a packet to a local broadcast address. I don't think that can route over the internet so you need some device to send the packet from on the network or over a VPN connection.

For the KVM part, that model server should have some form of remote control. I think they called it the Integrated Management Module (IMM) on those things. The IMM is running as long as the server has power, it's a tiny independent system. They have various licenses/feature sets but at minimum it should get you a web interface to see status of the server as well as power it on & off. It may also have remote console and media options but those are add-on costs so not everybody buys them. The default login information should be somewhere on the chassis unless it was removed or got lost. The old defaults used to be username all uppercase 'USERID' with password exactly 'PASSW0RD' with a zero instead of the letter O. I don't recall when they changed to newer methods but it's worth a try.

EndeavourOS on desktop and laptop side of things.

Unfortunately I can't help with boot speed. Cold boot on enterprise servers tends to be on the slower side even for latest servers at my work across all major vendors. For rebooting the newer ones are faster but the older ones (around same age as R620) are slow to boot no matter what.

For the firmware that system is end of support life so once they are caught up to latest you are done, just an FYI. Do you have a single or multiple Dell servers?

I don't have much experience with single server environments so I'd recommend research & verify everything before attempting to install any firmware. Dell OpenManage Server Administrator looks like it could be helpful. Failing that you can use the iDRAC web interface for some of the firmware installs. You'll need to research to learn which ones can be installed there & the proper order to do them. If your iDRAC has the fancy remote console & media features available you could use those features to handle the rest of the firmware updates as well as install any OS you want on it. If it doesn't and have some budget available then I'd say look on eBay (or equivalent) for iDRAC Enterprise card and license if needed.

If you have multiple Dell servers I would recommend using the OpenManage Enterprise virtual appliance they make. It's free and makes firmware updates on Dell servers quick and easy. It can also handle installing firmware in the correct order when necessary. It will need access to the iDRAC interface.

I think there were some court cases in the US the HDD manufacturers won that allows them to keep using those stupid crap units to continue to mislead people. Been a minor annoyance for decades but since all the competition do it & no govt is willing to do anything everyone is stuck accepting it as is. I should start writing down the capacity in multiple units in review whenever buy storage devices going forward.

Looking at Intel specs for that model of CPU has 'Intel Turbo Boost Technology' as 'No' so it may not be possible to get rid of the warning but fine to ignore. https://ark.intel.com/content/www/us/en/ark/products/122590/intel-core-i3-7020u-processor-3m-cache-2-30-ghz.html#tab-blade-1-0-7

Here's a similar issue on their github, https://github.com/AdnanHodzic/auto-cpufreq/issues/446 Sounds like it should still be able to slow down the CPU but it won't be able to change turbo boost due to processor not supporting that feature.

The container method used should be whatever you are more familiar with or prefer. They both have their own quirks, pros, & cons.

SELinux - If you don't want to deal with SELinux then set it to permissive mode. If you want to keep in enforcing mode you need to create the appropriate policies, https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/using_selinux/configuring-selinux-for-applications-and-services-with-non-standard-configurations_using-selinux

Firewall - If you don't want it's protection then look up instructions to stop & disable it on your distro.

Port forwarding - From linux container side you either need to specify host networking or the ports you want to allow through, there is no avoiding that if it needs to be network accessible. If you want it internet accessible then you need to setup port forwarding on your router.

Have you looked into something like yunohost? It may be the kind of thing you're looking for.

Would love a new Steam Machine and could actually be good this time. Proton didn't exist when they released the original Steam Machines which limited you to linux ports of games. I had bought two but wiped & did clean installs of Windows 7 so we could play all the games wanted to.

Before Proton, gaming on linux relied on native ports or WINE. Native ports were rare & not always better. WINE took some learning to make work well but I dunno, never got any good at it.

Yes, my order status has been at preparing to ship for awhile now. I been wanting a good Linux tablet to replace aging iPad and hoping this works well enough for me. I'll try to remember to update post on how I like it when it does arrive.

I swapped out delta fan a few months after release, agree fairly straightforward. Upgraded the nvme ssd to 1tb sometime before replacing with OLED model.