If you're not aware of what preload is, it's a command line application that allows you to add files to ram, so they can be accessed faster by the applications that need them.

It seems to work well for what I'm using it for, which is to run games from slower storage devices, but there doesn't seem to be any documentation for a proper way to remove the files once they've been added to ram. What I've been doing is to just use htop to terminate the preload command, but I feel like this is not intended at all. Is there a better way to remove these files?

I should mention that while trying to search for a solution myself, I did see gopreload mentioned a few times. I would try this out myself, but there's no proper installation instructions, at least not any I could find that work in Linux Mint.

As a sort of follow up to the post I made on my alt account, would I need to do to anything to Grub to continue using Linux Mint after removing Windows or would I still be able to boot into Linux Mint without having to do anything? As stated in the previous post, Windows is installed onto an SSD and I want run games from that SSD but I'd need to reformat the SSD in order to use it.

Edit: I don't need help with this anymore but because it seems like there is some confusion, I'm including the fact that I have Linux installed onto an external hard drive and Windows was installed onto the SSD which is in the laptop. I've already remove Windows from the SSD and reformatted it to ext4 so I can run games from it.

There's a game that, while I will admit that I don't really have an interest in playing, isn't working properly because it's trying to default to a GPU driver that isn't even loaded ( and possibly not even installed). The game is called Zbridge and it's standalone app is only distributed through Flathub. For some reason, it's trying to default to using "iris" even though the only GPU driver that's loaded is "i915". I have confirmed this with this:

j@j-Latitude-E7470:~$ lspci -k -s 2
00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)
	DeviceName:  Onboard IGD
	Subsystem: Dell Latitude E7470
	Kernel driver in use: i915
	Kernel modules: i915

But the game, on top of giving some other errors I've found to be trivial, still tries to load iris by default for some reason:

j@j-Latitude-E7470:~$ flatpak run club.zbridge.zbridge
[2:1229/172053.425891:ERROR:bus.cc(407)] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory
Gtk-Message: 17:20:55.221: Failed to load module "xapp-gtk3-module"
[2:1229/172056.788306:ERROR:bus.cc(407)] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory
[2:1229/172056.788423:ERROR:bus.cc(407)] Failed to connect to the bus: Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory
MESA: error: Failed to query drm device.
glx: failed to create dri3 screen
failed to load driver: iris
[41:1229/172103.010356:ERROR:viz_main_impl.cc(196)] Exiting GPU process due to errors during initialization
MESA: error: Failed to query drm device.
[2:1229/172118.159439:ERROR:gpu_process_host.cc(989)] GPU process exited unexpectedly: exit_code=512
MESA: error: Failed to query drm device.
[2:1229/172133.299896:ERROR:gpu_process_host.cc(989)] GPU process exited unexpectedly: exit_code=512
MESA: error: Failed to query drm device.
[2:1229/172148.425964:ERROR:gpu_process_host.cc(989)] GPU process exited unexpectedly: exit_code=512
MESA: error: Failed to query drm device.
[2:1229/172203.465700:ERROR:gpu_process_host.cc(989)] GPU process exited unexpectedly: exit_code=512
MESA: error: Failed to query drm device.
[2:1229/172218.491001:ERROR:gpu_process_host.cc(989)] GPU process exited unexpectedly: exit_code=512
MESA: error: Failed to query drm device.
[2:1229/172233.517237:ERROR:gpu_process_host.cc(989)] GPU process exited unexpectedly: exit_code=512
[2:1229/172233.517295:FATAL:gpu_data_manager_impl_private.cc(448)] GPU process isn't usable. Goodbye.

I have found a temporary solution by running export MESA_LOADER_DRIVER_OVERRIDE=i915 but as far as I can tell, I shouldn't have to do this because it should just be defaulting to the driver that's already loaded. If this is an issue with the app itself, I am going to submit a bug report but I want to make sure this issue isn't on my end before submitting one.

Final update (hopefully): It seems that I have been able to fix the issue. I'm not sure what exactly caused the problem but either removing fluidsynth or installing the wireplumber ppa fixed the issue and I have working audio again. I've also removed pulseaudio and undid my edit to the modprobe blacklist, as they were only done as a temporary solution and they are no longer necessary.

For the past three days, I've been having this issue where my computer starts with no audio and the only sound device listed is a "dummy output" device. I've tried looking online for solution but the only solution I found has to be redone manually every time I start/restart my computer. It also seems like this issue is common with and possibly specific to the sound card my computer has, which is an "Intel Sunrise Point-LP HD Audio".

The solution that worked for me was to add blacklist snd_soc_avs to the modprobe blacklist and then run the two commands sudo alsa force-reload and pulseaudio. Adding snd_soc_avs to the blacklist permanently brought back my actually audio devices but it didn't fix the audio nor did it remove the dummy output device. The two commands I listed do restore the audio and remove the dummy output device but they only work for the current session and I have to run them again after starting/restarting my computer.

I have no problem doing this if there isn't a permanent solution but I would like a permanent solution, if possible.

There is a mod for the DSi/3DS called "Twilight Menu" and it allows DS games to use the DSi's better clock speeds. Given that overclocking is a common feature for emulators, I was wondering if there were any DS emulators with this feature. I have seen discussions on other websites about this topic and how it would be possible but none of the emulators are listed as having an overclocking feature. All of the documentation and discussions about this seem to be at least a few years old and I know a lot can happen in a few years.

I bought a new tablet but I'm unable to use the charging cable it came with until I can get an adapter because I don't have anything that can except USB type C. I have multiple cables with a USB A connector but the tablet says that it's "slow charging" when I use them. I tried to look this up before posting but for some reason, a lot of websites refer to "normal changing" as slow charging now and I'm unable to find anything relevant to my issue. Would I be fine to use the other cables I have until I can get an adapter?

Edit: I no longer need help with this. I originally made this post because, for several years, I was told and had read that both slow and fast charging damaged batteries significantly more than normal charging. But, as multiple users have stated, it seems like I was being told and reading false information and slow charging is actually better for a battery than normal charging.

I'm using the Cinnamon edition of Linux Mint 22 (Wilma) and I've installed all of the dependencies listed on the build documention but when I try running meson setup builddir in the android_translation_layer folder, it gives me this error:

ERROR: C shared or static library 'art' not found

Assuming that the "art" that it needs is "art_standalone", I've already installed that and it seemed to install just fine but for some reason meson still can't find it. Assuming that it can work in Linux Mint, what should I try next?

I haven't opened the email, I'm just looking at the preview that gmail provides and it contains the name of my email with the first character missing and most of my phone number, like I stated in the title of my post. How concerned, if at all, should I be and is there anything I should be doing?

Edit: I think I've figured it out, it seems like Linux Mint defaulted to the wrong Kernel driver and I was able to switch it to the correct one.

I've already tried searching for this online but there is a reason I'm posting about it here. The last time I tried to install Vulkan drivers in Linux Mint, there was an update to the oibaf PPA that completely broke my Linux Mint installation and I had to manually reinstall it. I've read that, at least in the past, the oibaf PPA causes problems in Ubuntu but I can't find another solution to installing Vulkan drivers in Linux Mint. Is that the only way to install the Vulkan Drivers in Linux Mint, or is there another way?

Also, yes, Vulkan works in Windows and it did work in my previous installation of Linux.

Edit: Last night, I used the "Fix MergeList problems" option in the maintenance tab of software sources and at least for now, it seems to be working. So I probably wont need help with this anymore, hopefully.

Every hour or two, the Update Manager keeps giving me an error message saying that my APT configuration is corrupt and that I should switch to another Linux Mint mirror. It usually goes away when I do a manual refresh but it just keeps coming back. I have also tried switching to a different mirror but I get the same error. It also tells me to run apt-get update but even if I add "sudo" it just gives me an error message saying to run apt-get update.

It happened again so I'm adding screenshots in case they help. The first is the initial error, then it's the error I get when I try to change the repository and the third is the error I get when I try running the command it suggested:

I recently found out about a Linux Distro named Q4OS and I wanted to test out their claim that it only requires 256 MB of ram when using the trinity desktop environment. However, when I used the live cd in virt-manager with 256 MB or ram, it just kernel panicked at boot. So I then tried it with 512 MB of ram. In addition to some issues that are not present when you are using at least 1 GB of ram, such as "sudo apt update" causing the entire VM to become unresponsive, I noticed that it seemed to actually use anywhere between 290 MB to 370 MB of ram when the only thing running was the process viewer (which is htop).

Obviously, this is still very low for a modern Linux distro but I was wondering how accurate VMs are for testing ram usage.

And, yes I know that it would be pretty much useless on a PC that only had 256 MB of ram even if it did work. I'm actually checking the ram usage because there is a possibility that I may be using a very old computer of mine that only has 1 GB of ram at some point in the future. So I'm just testing it and eventually other distros out to to see which one I'm going to end up using (assuming I do actually end up even using that computer).

Edit: I just tried the 32-bit version in virt-manager and htop stated it was only using 232 MB of ram, which means that their claim was right and that I might have been using the wrong version.

Edit 2: I just tried installing the 64-bit version in virt-manager and htop stated that it was using about 350 MB of ram, so I don't know if installing it actually made a difference.

Edit: I'm no longer looking for help with this. The issue seems to be with the app itself and I have submitted a bug report for the app on github.

Before you tell me I should try another n64 emulator, I have been using other emulators but I have a game that isn't working and I'm trying to run it in other emulators.

Anyways, if I try to run simple64 through the terminal, I get the error message:

Failed to load module "xapp-gtk3-module"

I tried to look into this and it seems that I'm supposed to install "xapp" but I'm getting the error message:

The following packages have unmet dependencies: xapp : Depends: libxapp1 (= 2.2.8-1) but 2.8.2+virginia is to be installed E: Unable to correct problems, you have held broken packages.

I tried to fix it with sudo apt --fix-broken install xapp but it's just giving me the same error message. Is there anything else I can try before I try another emulator?

I need to reinstall Linux Mint but MOK Management is preventing me from booting into the live CD. I tried looking for a solution online but (assuming I did everything correctly) I couldn't find anything that actually worked for me. How do I properly disable it?

Also, I forgot to mention that I do have access to Linux Mint, I just have to run it in recovery mode because it wont boot normally.

Update: I was able to bypass MOK using my password, I still wasn't able to disable it but I was at least able to boot into my Live CD for Linux Mint and I'm in the process of reinstalling it. I would prefure if I could just disable MOK but I at least know how to work around it.

Update 2: I have fully reinstalled and updated Linux Mint but for some reason everything looks different despite the fact that I'm using the same settings and software I was before everything broke. But whatever, outside of the fact that I no longer have the dual boot menu and instead I get a string of text saying "booting in insecure mode" for some reason, it seems to be working fine.

I got an external hard drive enclosure for the purpose of recovering some of the files from my old laptops hard drive. The hard drive and all of it's partitions show up in both disks and gparted but it wont mount. When I tried to mount it manually, it gave the error message stating that it can't read the superblock. I've never had to deal with this issue before, so the only things I've tried so far were fsck and the data recovery option in GParted, and neither of them helped.

I tried searching about it online but all of the solutions I found online either didn't work or required methods that are currently not possible for me. The hard drive had Ubuntu (22.04 if I remember correctly) installed on it and I just need access to the files in the sdd3 partition, which was formatted in ext4.

I started using Spotube a few days ago and it seems interesting but I'm having a specific issue with it. I'm trying to listen to "Darkish" by A-One but despite the fact that there are multiple videos on YouTube, Spotube can't find a source and if I try manually searching for a source, all of the videos, including videos it uses as a source for other songs, are grayed out. There are three versions on Spotify (the original from Vol.7, a release from montage yellow and a remix in the "nonstop" 2012~2013 compilation) and all three of them have the same issue.

I have tried switching the api type from YouTube to Piped but the issue still persists. I mostly use the Linux version but the issue also exists for the android version. Is there anything I should try before contacting the developers?

I tried looking into this myself but I couldn't really find much about this error. The only solutions I could find didn't work for me. The first one was to use mokutil but at the point where I was supposed to run sudo mokutil --import MOK.der it gives me the error message "Failed to get file status, MOK.der" even though I did everything it told me to do. The other one was to disable secure boot and then run sudo '/sbin/vboxconfig' but even though it looked like it worked, I'm still getting the error message. I have re-enabled secure boot, so you don't have to worry about that.

Is there something else I can try or does VirtualBox not work in Linux Mint for some reason?

I tried everything from an old tablet running android 4.1.2 to a newer phone running android 10, and it crashes on all of them. The game runs fine on all of them, getting frame rates higher than the display frame rate, but then it just randomly crashes without an error message. So, I was wondering if this was just an issue with the game or if it was somehow an issue with the devices I was using.

I know the game hasn't been updated in a few years and the creator hasn't been active on GitHub in several months, so I know it's not likely that the game will get an update but I still wanted to ask about this issue anyways.

There are some games that aren't working on my phone and I wanted to try playing them in Waydroid on my computer running Ubuntu, however, there is a problem. Some of them are games that I've paid for but Google is refusing to allow me access to the Google play store from within Waydroid. So the only way (as far as I can tell) would be to use a third party client, like Aurora Store, to download them but I don't want to risk it if I can get banned.