Analogue3D remains on target to ship in Q4 of this year. There is no change in price or added cost for all open preorders. If you need to change your address, we will be sending out an email to all pre-orders one week before shipping. If you'd like to cancel your preorder at any time for a full refund, visit analogue.co/support. We appreciate your patience as always and can't wait to get 3D in your hands.

link to announcement tweet

Not really a ton to say here I guess, but at least it's not bad news, strictly speaking. Hopefully the 3D can ship out before the year is over

Analogue has traditionally always had annual mid October announcements. Here's everything we've seen so far:

• October 16th, 2024: Analogue 3D preorders announced
• October 16th, 2023: Analogue 3D announced
• October 16th, 2022: Pocket preorders, Pocket cartridge adapters, and final run of the Super Nt and Mega Sg announced
• October 16th, 2021: Analogue OS announced
• October 16th, 2020: Duo announced
• October 16th, 2019: Pocket announced
• October 16th, 2018: Mega Sg announced
• October 16th, 2017: Super Nt announced

Here's my post last year about the same thing: https://lemmy.world/post/20836902

(I also posted this on r/analogueinc)

(still no DAC support)

Release Notes

• OS
  • Fixed Single-buffered Sync Mode being forgotten on power off
• System
  • Added several missing HuCards to the Library
  • Fixed timing compatibility bug affecting some official and unofficial HuCards
  • Fixed reset bug on unofficial HuCards
• Controller
  • Added support for Switch Genesis/MD controllers
  • Added support for Switch NES/Famicom controllers
  • Added support for Buffalo Classic USB Gamepad
  • Added support for some later Wii Remote Plus controllers
  • Fixed button mapping for Switch Joy-Cons and Switch SNES/N64 controllers
  • Fixed various 8BitDo controllers when connected via USB: M30 2.4g, N30 2.4g, SN30 2.4g, Zero 2, and Micro
  • Fixed PS4 controller home button bug when connected via USB
  • Fixed occasional crash when attempting to pair controllers
  • Fixed reconnecting/pairing of Bluetooth LE controllers that had been paired to other devices

[Link to original announcement Tweet]

Reminder about Controlling the Menu

• For controllers without a menu button such as the SN30:
  • The menu can be opened by pressing Select + Down (hold Select first)
  • Original Display Modes can be cycled through using Select + Down + Left/Right (hold Select first then Down)
  • Save States can be created by pressing Up + Select (hold Up first)
  • Save States can be Quick Loaded by (enable in menu) pressing Down + Select (hold Down first)

Analogue 3D Shipping Delayed to July 2025, Pocket White Restock, PocketOS and DuoOS Firmware Updates

• Analogue 3D shipping has been delayed to July 2025.
• Analogue Pocket [white] is back in stock and shipping. Analogue Pocket [black] and all accessories are in stock and shipping too.
• PocketOS v2.5 and DuoOS v1.5 firmware released.

[Link to original announcement Tweet]

(still no DAC support)

Release Notes

• GB, GBC
  • Fixed a bug with the backup save export that is generated when making Save States
• TG16
  • Added several missing Hucards to the Library
  • Fixed timing compatibility bug affecting some official and unofficial Hucards
  • Fixed reset bug on unofficial Hucards
• Nanoloop
  • Fixed ghost note playback
• Dock
  • Added support for Switch Genesis/MD controllers
  • Added support for Switch NES/Famicom controllers
  • Added support for Buffalo Classic USB Gamepad
  • Added support for some later Wii Remote Plus controllers
  • Fixed button mapping for Switch Joy-Cons and Switch SNES/N64 controllers
  • Fixed various 8BitDo controllers when connected via USB: M30 2.4g, N30 2.4g, SN30 2.4g, Zero 2, and Micro
  • Fixed PS4 controller home button bug when connected via USB
  • Fixed occasional crash when attempting to pair controllers
  • Fixed reconnecting/pairing of Bluetooth LE controllers that had been paired to other devices

[Link to original announcement Tweet]

Reminder about Controlling the Menu

• For controllers without a menu button such as the SN30:
  • The menu can be opened by pressing Select + Down (hold Select first)
  • Original Display Modes can be cycled through using Select + Down + Left/Right (hold Select first then Down)
  • Save States can be created by pressing Up + Select (hold Up first)
  • Save States can be Quick Loaded by (enable in menu) pressing Down + Select (hold Down first)

Tattoo artist and parlor details:

• Invasion Club in Osaka, Japan
• Artist is Chapi

Thanks everyone for joining! I'm glad to see some posts here. Truthfully, I made this community and then kinda got busy with some other things and forgot about it 😆

If anyone else is interested in modding, please let me know. Honestly I don't have a ton of experience in modding, and have never done it on Reddit either, so any help is appreciated.

But either way, thank you everyone for coming and sharing your tattoos!

Hello,

Just so everyone knows, it appears that maybe the latest EverDrive N8 Pro firmware (NES edition, Famicom edition), version 2.15, could have some compatibility issues with the Nt mini Noir.

You can see some more discussion around this from these two RetroRGB Q&A videos:

• Episode #338 at 28m18s
• Episode #339 at 2m22s

I'm not sure if there is any solution yet for this, or if this person might've found a solution themself 🤔 But I wanted to make sure attention is raised for this just so that people are aware.

I have an N8 Pro and an Nt mini Noir, but I haven't tried this new firmware yet, so I can't really report my own findings 😅

It's really hard to see on the website itself 🙄 but here is the direct quote:

Analogue3D is compatible with HDMI TV's, it is not compatible with CRTs or Analogue DAC.

(still no DAC support)

Release Notes

• OS
  • Fixed Library thumbnail generation

(still no DAC support)

Release Notes

• GG
  • Fixed GG rotated button mapping
• openFPGA
  • (Beta) Controller remapping now applies to all four controllers when Docked. This is a beta feature.

Store is offline right now, but should go online again at 8am PDT

https://store.analogue.co/

Time zone conversion: https://www.timeanddate.com/worldclock/converter.html

Hey everyone,

As you may know, Analogue has traditionally always had annual mid October announcements. Mostly following along with this reddit post, their timeline has been:

• October 16th, 2023: Analogue 3D announced
• October 16th, 2022: Pocket preorders, Pocket cartridge adapters, and final run of the Super Nt and Mega Sg announced
• October 16th, 2021: Analogue OS announced
• October 16th, 2020: Duo announced
• October 16th, 2019: Pocket announced
• October 16th, 2018: Mega Sg announced
• October 16th, 2017: Super Nt announced

I'm hoping to see some more news/information about the Analogue 3D, along with Pocket DAC support... 🥴

(This was also posted on r/analogueinc.)

Still no DAC support...

Link to announcement Tweet

Release Notes

• OS
  • Added Sleep/Wake for NGP and NGPC
• GB, GBC
  • Added support for analog audio via cartridge pin
  • Added new Display Mode: Vacuum Fluorescent
  • Fixed irregularity with GB Original Display Modes
  • Fixed minor bug affecting GB and GBC Save States
• GBA
  • Fixed Sleep/Wake bug affecting some revisions of Pokemon FireRed, LeafGreen, Super Mario Advance 4 and a few other games
  • Fixed Memories save data backup not working on cartridges with special hardware
• SMS
  • Fixed Memories not showing in list when using SMS adapter
• NGP, NGPC
  • Fixed various game startup bugs
  • Fixed various video rendering bugs
  • Fixed video alignment when docked at 720p
• TG16, PCE
  • Fixed issues with composite palette
  • External HuCard audio is now off by default
• Lynx
  • Fixed screen flipping bug
  • Fixed rotation on launch bug
  • Fixed bug affecting Alpine Games
  • Improved booting on some homebrew carts
  • Improved Save States support
• openFPGA
  • Added support for the following Original Display Modes: NGP, NGPC, TG16, Lynx
  • Core Settings>Reset to Defaults now properly erases browser history
• APF
  • Fixed data slot sizes not being updated after a Target command [0192 Open new file]

💰😩

No indication about what color(s) will be available, but I'd definitely assume it to be only just black and white.

Link to related Tweet: https://twitter.com/analogue/status/1775176709282668945

Official Analogue support link: https://www.analogue.co/support/duo/firmware/1.3

Link to related tweet: https://twitter.com/analogue/status/1773726811391709366

• Added low-pass filter to ADPCM channel
• Adjusted audio levels on all channels
• Improvements to composite video palette
• Fixed issues affecting CD stability
• Fixed crashes affecting the following games:
  • Doraemon - Nobita no Dorabian Night
  • Efera & Jiliora: The Emblem from Darkness
  • Far East of Eden Tengai Makyou - Ziria
  • Fiend Hunter
  • Forgotten Worlds
  • It Came From the Desert
  • Gate of Thunder + Bonk's Adventure + Bonk's Revenge
  • ImageFight II: Operation Deepstriker
  • Mad Stalker: Full Metal Force
  • Riot Zone
  • Snatcher CD-ROMantic
  • Syd Mead's Terraforming
• Fixed synchronization for:
  • Sherlock Holmes - Consulting Detective
  • Sherlock Holmes - Consulting Detective - Volume 2

I don't have a Duo, but it's nice to see the continued quick updates coming.

Still hoping to see DAC support for the Pocket Dock and Duo soon 😊

Looks like a mostly short ish list of changes... but still no DAC support unfortunately 😭 😭

• OS
  • Added support for Analogue Pocket Adapter Set including TG16, PCE, SuperGrafx, Lynx, NGP and NGPC
  • Memories and Sleep/Wake are supported for TG16, PCE, SuperGrafx and Lynx
  • Boot to Cartridge now skips Game Detail screen
• APF
  • Fixed data slot loads with asset sizes not divisible by 4
• Dock
  • Fixed controllers occasionally not responding when using the Down+Select hotkey
  • Adjusted display video alignment symmetry