Due to lack of well designed buyable solutions, I built my own bicycle stand from scratch.

BOM:

• 14 Mtr. 3030 aluminum extrusions
• 48x M8*16-25 Button Head Screw
• 6x Feet with mounting Kit for 3030 Profile
• 10x 90°-Angles for 3030 Profile with mounting kit

Tools:

• Screwdriver with bits for screws
• Drill
• Drillbit 6-8mm
• Allen Key
• Chopsaw 1)
• M8 Tap 1)

Guide:

1. Cut extrusions to length 1) (F.e. 50cm spacing, 5cm tire width 50cm tire slot lenght, 25cm elevation. You'd need 1x2m, 20x50cm, 2x83cm, 10x11cm, 2x25cm)
2. Cut M8-Thread into 20x50cm, 2x83cm and 2x25cm 1)
3. Drill 6-8mm holes into 3030 Profiles corresponding to M8-Thread locations.
4. Fit Everything together.
5. Profit

1. Only nececary if you cut the extrusions to length yourself. If you order the correct extrusion length pretapped you don't need those.

As my bug reports explains: The Video-Guide and Script from SpaceinvaderOne for ZFS Snapshot Backups cannot safely backup live databases, it'll corrupt them. Please make sure, that you either stop all dockers using a database before running the script or you copy the live database into a db-dump beforehand, as long as you use this script.

@mods: maybe link community ![email protected] in the sidebar?

We need to start to fill up lemmy :) Can you solve this issue?

My HEVO (Hypercube Evolution), now 5 years old started to have very weird banding.

It has a Bowden BMG Extruder and a E3D V6 printhead with CHT-Nozzle. MKS Robin with TMC2209 and Klipper.

Benchy is ABS, lower one is HIPS. Printed at 230°/105° bed. part cooling fan off.

I took apart and cleaned the extruder. The gears look intact and i can move the extruder by hand without binding. I found the E3D V6 was loose. I retightened it, which didn't solve the issue.

I'll spend a beer to the one that solves this issue ;)

Edit: Found the Issue: hotend not hot enough.