I just noticed that my feed is never getting an NSFW posts anymore, and it appears that nothing is newer than 1 month ago on many of the magazines that used to pop up once in a while.

What's changed?

Many TSA Officers Voted For Trump, now lost their union.

Holder for a mop or floor brush. Glued to the wall using double-sided tape 58x58 mm

The filter cleans the filament from dust. When you change the filament roll, you do not remove the filter, but leave it attached to the spool. This prevents the filament from unwinding and tangling. Inside, you should insert a piece of sponge, make a hole in it and thread the filament. One filter-clip for one filament roll.

I needed some eyelets to be able to attach a pvc sheet to some hooks. You will need to glue the eyelet to the material if the material is too flexible and/or increase width around the eyelet so that the flexible material can not escape the eyelet to easily underdrag.Please look at the two openscad screens for the description of the available paramters.

Ladies & Gentlemen it gives me great pleasure to announce a new competition to win multiple printers from Anycubic and Bambu lab, all you have to do is design accessories for the XBow Version 2.0 Pro send me links to your designs and in 30 days i will announce the winners, currently i have enough credit for 5 printers also click the link and join makerworld https://bit.ly/4dqCmGa the more join the more gifts i can give out, this is sponsored by GCI Admins and not Anycubic or Bambu, so a special thanks to our lads 😍Don't forget to "Click A Like" & check out my other Cool designs and Follow my Weekly dose of KooKoo uploads, PLZ leave a comment what you want next!Version 2.0 Ultimate Edition https://makerworld.com/en/models/526534#profileId-454892Note: I added the STEP files so feel free to mess with them!ACCESSORIES:https://www.thingiverse.com/thing:6644829 -Mongolian Style Releasehttps://www.thingiverse.com/thing:6252161 -Serving Toolhttps://makerworld.com/en/models/486891#profileId-399732 -XBow Sight by Durbanpoisonpewhttps://www.thingiverse.com/thing:6656710 -Broadhead Organizerhttps://www.thingiverse.com/thing:2695878/files -Fishing AccessoriesThis was requested by one of my followers, its "still in the works" because i wanted a professional archer to give it a go and give me feedback on how well it works as I'm no expert and I only shoot bows for fun.Frame dimensions in mm > x:190 · y:212 · z:70Its intended to an all in one survival tool so i will be adding a few more accessories in the future. I also tried to use bearings in the pulleys but they didn't affect shooting much so you can def get away with just solid pulley. Print Settings:25% infill8 walls on most parts except the pulley, Band Mounts & WB which I used 12 to make sure it does not flexSupports only for the frame, NO Brim or Raft required, Long and easy print ;)NOTE: I just added the print profile i'm using on my Bambu printersBOM:Bands length after cutting 180mm LParacord for the stringPully:M6 60mmL Furniture screw x2Optional Flanged Bearings x4 (F696zz)Grips:M3 12mm L x23mm 22mm L x2 PinsRubber Holders:M5 30mm L x2 Band Aligners:3mm 14mm L x4 pins P Rail:M3 20mm L x1Attachments/Accessories:M6 40mmL Furniture screw + Barrel nut (Some require more than one set)Fishing Reel:Winding HandleM6 60mmL Furniture screwSpoolM6 60mmL hex screw + Lock NutBands cut 50mm from each end to give you the equivalent of a 30lb bow at 28" draw length. If you cant find the exact ones you can use any tube band with 8mm OD and 4mm ID x 180mm L... https://bbguns4less.co.uk/products/trumark-slingshot-power-band-heavy-pull-rr-2.htmlTakedown Arrows: https://www.amazon.com/gp/product/B09WVT3J6TFurniture Screws: https://www.amazon.de/-/en/Furniture-Cylindrical-Connecting-Galvanised-Connector/dp/B09NLTT3Z3/ref=sr_1_14Bubble Level: https://www.amazon.de/dp/B0C5ML9QXD?Testing: https://www.youtube.com/shorts/lVDLl8R8F2E & https://www.youtube.com/shorts/coq2-F3OdlM & https://www.youtube.com/watch?v=QtruCNdfnFA&ab_channel=CrizzledOne & https://www.youtube.com/watch?v=xCAaZIdIrDE&ab_channel=kennyBollesIf you are interested in other prop firearms, Airsoft parts, tutorials and designs do join our group on Matrix:https://app.element.io/?pk\_vid=f12152aac29bbc4a166549437941781a#/room/[#GCI](https://fedia.io/tag/GCI)-General:matrix.org!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.!Don't forget to hit the LIKE! & check out my other Cool designs & Follow my Weekly dose of KooKoo uploads ;)

I designed a support for my steel rods, for better storage organization. The rods are 18mm diameter and holes are 3.8mm diameter for M3.5 self-tapping screws. The snap on covers on top are for aesthetics. Feel free to remix it!

Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.

reviewed Can Wasp Protection-thicker-ring to make it tighter-tab to be bend for easy removal and spin-nice pattern Bend the tab about 45% then install

Fits standard syringes (18.5 mm Ø) Materials: M5x100mm full thread rod w/ nut M3x15mm screw w/ nut

Plastic Buckle design with the FDM 3d printing method in mind: 1. No support needed 2. Prints in only 30 minutes. This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind: No support is needed Prints in only 30 minutes Optimized print orientation for strength Designed to counter possible elephants's foot The outside dimensions of the model can be seen in the picture below The holes are 6mm x 11mm

Collapsible housings for the xt60, as well as a housing for the PD trigger integrated with the xt60.

Protects your drink from insects and dirt. Please note, this item is not watertight. Keep your drink upright! Schützt Ihr Getränk vor Insekten und Schmutz. Bitte beachten Sie, dass dieser Artikel nicht wasserdicht ist. Halten Sie Ihr Getränk aufrecht Nozzle: 0.4 mm Thickness: 0.2 mm Wall Line Count: 3 Infill: 5-10 % Infill Pattern: Lines Support: No

Just some various funnel shapes - used mostly for water transfer. Designed in SolidWorks.

Button extension - Buttonhole Pants, or an item of clothing that you have been wanting to wear for a long time? But still a few centimeters to lose... Don't wait and use this buttonhole extender by changing the lengths throughout your size loss. Choose between the 3 extension lengths provided: 25mm, 30mm or 40mm. Print the part with the button up, and enable the supports. Lightly heat the rounded end to give the desired flexibility to fit it around the button in place. Place it quickly, hold it tight for a few moments, and it's ready! To remove it, use light force while twisting the piece. It is flexible enough to be taken out without having to reheat it... be careful with the clothing otherwise... Obviously reusable. Printing in PETG, PLA, ABS depending on the colors to match the clothes. Need another size or logo on the offset button? ... contact me. -o-o-o-o-o- Extension de bouton Un pantalon, un vêtement que vous voudriez remettre depuis longtemps ? Mais encore quelques petits centimètres à perdre... N'attendez pas et utilisez cet extenseur de boutonnière en changeant les longueurs tout au long de votre perte de taille. Choisissez entre les 3 longueurs d'extensions fournies : 25mm, 30mm ou 40mm. Imprimez la pièce en plaçant le bouton vers le haut, et activez les supports. Chauffez légèrement l'extrémité arrondie pour donner la souplesse voulue permettant de l'insérer autour du bouton en place. Placez le rapidement, maintenez le resserré quelques instants, et c'est prêt ! Pour l'enlever, forcez légèrement tout en tordant la pièce. Elle est assez souple pour être sortie sans devoir la réchauffer... attention au vêtement sinon... Evidemment réutilisable. Impression en PETG, PLA, ABS selon les couleurs à assortir aux vêtements. Besoin d'une autre dimension ou d'un logo sur le bouton décalé ? ... contactez moi.

Plastic Buckle design with the FDM 3d printing method in mind: 1. No support needed 2. Prints in only 30 minutes. This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind: No support is needed Prints in only 30 minutes Optimized print orientation for strength Designed to counter possible elephants's foot The outside dimensions of the model can be seen in the picture below The holes are 6mm x 11mm

Closet Hook Extension Closet Hook The hook has a 10mm hole. It comes in three thicknesses. You can simply attach the hook to the hanger and hang it. If you have other ideas, feel free to change it, I Uploaded the Fusion 360 file. As an Amazon Associate, I earn from qualifying purchases.

No credit for design! All credit goes to the creator in the link below!https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder/files Works great with EDC Bed Scraper UPGRADED and the Miniscraper! I also added a compressed knob file here:https://www.thingiverse.com/thing:6590805 The Compressed knob file will work for people who's printers say that the original knob file is "Too Large".

ENGLISH This simple clamp can be used to keep two boards at a right angle while the assembly is curing. I posted an all-in-one STL including the four parts and a 0.2mm height adhesion brim. And of course all parts as individual STL's. No supports are required. I suggest a filling of 20% to 50%. Additional hardware required : M8 nut M8 x 80 (or longer) scew/bolt FRENCH Un serre-joint d'angle simple pour assembler deux pièces en attendant que la jointure soit permanente. Un STL regroupe les quatre pièces avec une couche d'adhérence de 0,2 mm. Et bien-sûr il y les STL des quatre pièces individuelles. Aucun support n'est requis. Je conseille un remplissage entre 20 et 50%. Quincaillerie nécessaire : Ecrou M8 Boulon/vis M8 x 80 (ou plus long)