I posted here a bit ago with zero 3d printing experience. You guys helped me mash this case together. I printed it, attached it to my phone, and it seems to work. It has a magnetic ring that I bought from quadlock, but it fits in the case, so it effective has both quadlock and magsafe capabilities. I reinforced the attachment points with 3m transfer tape, and it is solid.

My next project to print (which someone already has made) is a mod to convert the quadlock bicycle mount into a wireless charger.

Thanks all!

I'm very happy to see this community seems to be thriving here, and im impressed with how many people quickly engaged me with ideas on how to mash two things together. I've abstained from the old site since last May time-frame, and I'm honestly happy with the quality of interactions I've had here.

The folks in 3d printing helped me out greatly with this, and I was able to mash this together today. I haven't printed or tested it yet, but it's designed to be used with the quad mag ring. I'm going to use some very thin and strong 3m adhesive tape I have to ensure it is secure to the phone, and use for a quadlock mount on the bike if it actually works.

Perhaps this niche case will be useful for someone else?

I'm glad that this is an active community, and the advice the other day was really helpful. Once I figured out how to make other shapes to delete/ subtract, merge, I was able to do this easier. I made this draft in Windows 3D builder, it seemed to be pretty easy to manipulate shapes. We'll see how this goes as far as printing and what not.

We'll see how printing goes and if this case actually works.

I have a few MakerBot-brand printers I can use, I'm not sure the models. One of them is slightly larger enclosed in glass, and I'm told it's temperature controlled, the others are smaller, and they are open. I know the only filament I'm allowed to use with these ones is PLA.

Hello, thanks in advance for any help. I have a little project I am trying to do-- I would like to merge a "Mag quadsafe universal adapter" with a Galaxy Fold 3 case. I have both STLs and i began playing with blender yesterday, and it's possibly a little above my head.

What it seems like the steps are from my (peprhaps simplistic) point of view:

• trim the openings on mag quad adapter to fit the camera lens and side buttons when it is perfectly centered on the case.
• delete a square the exact size of the magsafe quadlock adapter that is perfectly centered on the back of the phone case
• put the current model from the mag quad stl in thus square

The only thing I've been able to accomplish thus far is centering the mag quad adapter on top of the case. I cannot, for the life of me, figure out how to trim in to fit the camera and side button openings....

Any help is greatly appreciated, even if it's just a starting point.

I have an orbi rbr50 with vowel firmware. I am abroad, but use openvpn to connect to nordvpn to connect via the united states.

Whenever I restart my router my configuration folder for open VPN gets deleted and I have to redo everything. AFAIK this is not supposed to happen. Anyone familiar with voxel firmware/orbi, that could potentially give me some insight for troubleshooting?