I moderate a community that requires me to add a reason on why the posts were removed. It would be nice to have this option in Summit, so I don't have to go into the Lemmy web interface every time.
So, I have this 12V LED Strip (not RGB) and I want to power it using my PCs power supply. I also have an old case fan with this Molex connector on the back, which should give access to 12V according to the pinout.
My plan, as you might have guessed, is to cut off connector with some cable overhang, isolate the ends on the fan side, and solder some extension wires (probably speaker wire) to the Molex connector wires.
If I now connect that wire to the LED strip, taking care to connect the ground to - and 12V to +, it should just work, right?
Are there any risks I have to watch out for? My power supply is a 600W supply, so it should have plenty of power for the LEDs. I'm 99% sure this plan should walk flawlessly - but I want to ask you guys first so I don't burn my house down.
I can't be the only one who experienced this more than once
Oh look, it's that weird glowing thing you can see in the night
Shot with Kodak Pixpro AZ401, colours slightly edited in GIMP
Disclaimer; I'm not at all a professional, just someone who bought a 40x zoom camera a while back.
Can I get uhhhhh... Intel Boot Agent with mayonnaise, please?
I saw it working earlier, but it broke. Probably because of the rain.
Seen on car park ticket machine. Display was all kinds of messed up and changed rapidly
Here's a GIF (FLASHING LIGHTS):
For some reason i couldn't hold my phone steady back then .-.
Found this abomination at Ikea... Who approved this design? [OC]
For all those who miss it from reddit: Here it is again: Don't dead, open inside.
It's meant for images of items, signs etc. with word or letter alignment, that makes the thing almost unreadable. Excited to see all the original content y'all have to offer!
If you're interested: ![email protected]
Have fun :D
https://lemmy.ohaa.xyz/c/dontdeadopeninsideOpen linkView original on feddit.de