Bought some Mirka Abranet sanding discs too, and the dust extraction is so good now it produces virtually no dust at all. The light around the sanding head also highlights every imperfection on the wall amazingly well.

It's a bit on the heavy side - almost 7 kg - but I can deal with that. Luckily I only need it occasionally.

Robota S22 is the exact model, in case anyone's interested. Paid 170€ for it. There were cheaper and lighter ones, but those didn't have lights.

Another thing found at the restore. Plastic. About 3" long.

The new tome has arrived.

https://lemmy.ca/pictrs/image/7b2abb10-6e0e-4c35-aef1-898a0259db60.jpeg

I'm looking for a heavy duty knockout punch. Something that can punch a hole in 1/4 inch 316 stainless steel. Does anyone know where I can start looking for one?

Cool new slip joint design from Tsunoda.

Jaws are a bit narrower vs the old design but, also feel much lighter.

New pliers have three slot design similar to Snap-On and Knipex models which allows then to grip larger bolts and etc.

New design has recessed pivot point making them even narrower.

New design only comes in bare metal handles. Personally I've always preferred the traditional plastic dipped handle, never tried bare metal.

The most interesting design and only original/new aspect though is the curved jaws. They're meant to grip in the middle of bolts so you didn't round the corners and help gripping angles in general. Never seen that before, will be interesting to see how it works out in real world use.

So big brains behind HF Series 3 made the boxes slightly (1/8") larger than Series 2 at least for the 26" boxes (now "27"). This means you can't drop a series 3 on top of a series 2 cart... The other way around works for the 2 people out there for whom that'd ever apply.

At any rate... Craftsman 2000 series 26" top boxes fit Series 2 carts with about an 1/8" to spare. They are 26 1/16" wide. Series 1000 should as well.

Started with woodworking as a hobby a year ago. I have plenty of tools now. Started with a workbench which is way to big for my small barn where also bicycles are stored (Dutch). So that’s going to be dismantled.

But what frustrates me is the lack of organized storage of tools. So I’m thinking of a French cleat wall to put my tools against.

Has anyone here did a French cleat wall and want to share experience or photos?

About to be in the market for a new circular saw, just looking for the typical 7.25 blade saw. One thing that has constantly bothered me though is the depth adjustment. Every saw I've ever had used a flip lever on a nut in the back, and that's always been the point of failure. They slip, break, seize or otherwise fail first before anything else on the saw. And it's literally the only setting on a saw that i ever touch beyond changing blades.

So what brand has a reliable depth adjustment?

Hey there, I went and dropped my nailer [Workx WX 840L] and broke the plunger; the contact piece top front. Been looking on the web but cannot find parts. Anybody on here knows where I can find parts (preferably in Canada)..?

Thanks

10x cheaper than the original. Likely not Wera quality but probably not 10x worse either. I've been quite happy with the other Parkside tools I've got.

Along with the two roller stands the total price was what a dedicated saw stand would've costs and I would've needed to buy the rollers anyway. Pretty impressed with how solid that table is and takes literally 15 seconds to set up. It's supposed to withstand 1000lbs.

What modular tool storage system would you recommend?

I have many tools for many different DIY and home improvement projects. My ADHD means I am just awful at maintaining long term organization of those tools. I want to use a system where I can have a box for each discrete activity or tool type. That way I can take out only the boxes I need and then or those tools away immediately when I am done. I don't mean bring them back to the workshop and put them away, but instead have their mobile tool box be the thing that is also used for long term storage.

For example, I might have the following boxes ready to go:

• Everyday box - screw drivers, allen keys, hammer, rubber mallet, speed square, torpedo level, pencil, sharpie, blue masking tape, etc.
• Basic electrical - multimeter, insulated tools, electrical tape, assorted common wire nuts, wire stripper, etc.
• Painting - assorted brushes, rollers, roller covers, and masking tapes as well as a painters multi tool, roller tray, hand held paint bucket, sanding sponges, etc.
• Drill - cordless drill, drill bits, screw driver bits
• Driver and rachet - cordless impact driver, impact bits, hand rachet, rachet bits
• Pocket hole - my various Kregg products
• More as needed

If I am going to paint a doorway, I can grab the painting box. If the wall needs repair, I can grab the painting and drywall boxes. If I am hanging pictures, I can grab the everyday box and the drill box if I am using screw anchors. This should make cleanup easier, because picking up the job location is also getting things sorted to go back in storage. That second part is my weakness.

What system would you use for this? I feel like a system that includes both wall storage and multiple bin types would be best, but I am open. I want to use the same general storage system for other DIY hobbies as well, so I would rather not break the bank.

If it matters, all of my cordless tools are DeWalt. My electric yard tools, though unlikely to factor in, and Kobalt.

Any and all recommendations are welcome. Alternative thoughts are welcome. How would you approach this?

TONE - RH2VHS

KTC - BRSW3

https://imgur.com/a/EBuMlo1

Come on you tool lovers out there. Has anyone heard of the device I described on the subject line? Anything close?

[Klein Tools Model #2100-9] Wire stripper notches are especially useful sometimes. I've beaten on this pair quite a bit and they still cut like they're brand new. I also have the non-stainless version, but I prefer the stainless.