I just use 2 elac bookshelf speakers, an elac center, and a small sub that won't shake the whole house

Does anyone have recommendations for the best 4k projector bellow $1500 usd price point? I am open to refurbished options.

I am considering a Nebula Cosmos 4k but would prefer to ceiling mount my projector, and it isn't really built for that.

I am installing in an open floorplan livingroom projecting on a drop-down screen in the middle of the room approximately 10 ft from the wall, with couches up against the wall.

Any first hand opinions would be greatly appreciated.

Hi everyone, I have been tempted to go the Dolby Atmos route for a while now and I decided on the receiver to use: Onky RZ-50, but now my problem is that I have to mount 2 sets of speakers to my ceiling. I have 3 pairs of Elac Unifi 2.0: two front, two sides and (at the moment) 2 backs. The backs will be shifted to be atmos back speakers. So I am going for a 5.1.4 setup.

Now I am thinking about shifting my fronts to be the atmos fronts and buy the new Elac Debut 3.0s as the new front speakers. However the Unifi 2.0s are quite big and heavy, so I am not sure if there is a reasonable way to mount them to the ceiling without worrying that they fall on your head. Because of that I am thinking about buying the Micca RB42s for the front atmos which are a lot smaller and lighter.

I found this mount by k&m which claims to hold up to 25kg but as it would screw in the back of the speaker I am worried about the wood of the Unifi 2.0s to just split, as the speaker is very long....

What are your thought?

Hello everybody! I've recently picked up an old jvc surround sound setup, with the jvc-1070r as receiver. I've hooked it up to my via optical, but it doesn't seem to be working. I have an LG tv and audio out is set to optical, and on the receiver its plugged into "Optical in: Digital 3 (TV)". I also tried just tuning into radio, but that didn't make any sound either. It did say "auto muting" on the receiver though, and it didn't work with 2 other speakers i tested. If anybody can help me out that would be great!

Thanks in advance

I've got an old Yamaha YST-SW320 which has a 10" downward firing speaker, active servo tech, and puts out 250W and weights in at 18kg. It's putting out the bass just as well as it did in 2001 when it was new. Its a pretty good sub for a living room setup and rattles the walls and doors in that low 30Hz or less range. It hides beside a sofa the sits on the right hand wall in a relatively small room.

I would be especially interested in knowing how people that have added a sub in a living room home theatre setup feel after running another sub for a time. Was it worthwhile?

I'm wondering how something like the SVS PB-2000 sub would pair with this? Do I really need to worry about matching subs? Is it a thing? I assume I'll place them diagonally opposite one another, angled to avoid standing waves.

BTW, not my gear in the pic, its just a pic of the subwoofer. I've got 5.1.2 and elac speakers, with Energy rears.

EDIT: Thanks. I'll see if anyone's got an option to try before I buy. If not I'll probably stick with the single sub for the foreseeable future.

I use a lot of media sourced on the internet, mostly .mp4 or .mkv files. For example, one source that gives me problems is Youtube "surround sound" test videos. I often feel the surround sound is not as "advertised" in the media title. The surround sound does seem to output to the different channels but it feels more like a virtual or All Channels fake-surround to me.

My downloaded files from demolandia.net sound far better and convince me my setup is good. My kids think the Atmos file 'Audiosphere' is great. The audio clearly bounces around my 'audio sphere' and I've had more entertainment from that video file than many others I have. Is this a case of the media not being what is advertised, or a codec issue that my Receiver can't handle? Or something else? Any thoughts?

I went to my local theater for Oppenheimer and was shocked by how bad the experience was. I hadn't been there in 10 years with the only other theater experience being Dolby Cinema Laser a few times which is great. This dated local theater with Christie DLP projectors was shockingly bad compared to what I have become used too. The "blacks" were more of a bright whitish grey and the entire picture looked ridiculously washed out. The audio was subpar and bass almost non existent.

This is the same theater that looked great to me years ago. My budget 5.3.2 Atmos and S95B blow it away now.

Has anyone else been shocked by an unexpected bad experience due to being unknowingly spoiled by newer tech?

An invaluable guide from Dolby to setting up Dolby Atmos in your home. Even if you don't have Atmos there is good information for setting up other configurations.

I'm currently trialing a couple of hi resolution music streaming services - Quobuz and Tidal and I'm interested in Atmos music releases which are becoming more and more common. Tidal definitely has the edge of Quobuz for atmos releases but its also pretty expensive at NZD$30 a month, slightly more than Quobuz and about the same as Spotify premium (which doesnt have atmos afaik). Any one using any other services? Do you feel you're getting value for money?

The title says it all really. I going to upgrade to a RX-A4A. I use my home theatre everyday as the main TV in the living area. The living area is a rectangular 4m x 5m room, carpeted, and fully open to the rest of the open plan living area on the lefthand side. I've been using Energy floor standing speakers as my mains but I intend to move them to the back to replace a couple of Energy bookshelf speakers. I have a Yamaha downward firing sub front right that I run fairly hot.

Any thoughts on the match? Any thoughts about the speakers? They'd be close to the top end of my budget.