dual_sport_dork 🐧🗡️ lemmy.world5Hide 5 repliesRockin'. INB4 you get crucified for FDM prints not being "food safe." ...I might just be having flashbacks to that time spent at the other place, though.15Reply
The Pantser replylemmy.world1Hide 1 replyI use fdm prints for food all the time. Just use once and throw away. As long as you use steel nozzle I think it's fine no lead dangers.12Reply
brenticus replylemmy.worldYep, not usually safe to reuse your prints or put them in heat or get them wet, but for a single batch of cookies the risk of a 3d printed cookie cutter is pretty minimal.7Reply
ZZagamTheVile replylemmy.world1Hide 1 replyMy wife did me a favor and soaked all my pla cookie cutters in super hot water to get them clean.10Reply
tthreelonmusketeers replysh.itjust.worksIf I vapour smooth it with acetone, would be safe then?4Reply
GGiu176 replylemmy.world1Hide 1 replyHere is your STL, thank you for your patience: https://www.thingiverse.com/thing:63764541Reply
rrenrenPDX lemmy.worldThese might work better as a round cookie and using the cutter as an imprint. Then you can color in the important bits with icing.5Reply
LLemmy Tagginator utter.onlineNew Lemmy Post: Tasteful biscuits (https://lemmy.world/post/9315025) Tagging: #3dprinting (Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.) I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md1Reply
13 replies
Rockin'.
INB4 you get crucified for FDM prints not being "food safe." ...I might just be having flashbacks to that time spent at the other place, though.
I use fdm prints for food all the time. Just use once and throw away. As long as you use steel nozzle I think it's fine no lead dangers.
Yep, not usually safe to reuse your prints or put them in heat or get them wet, but for a single batch of cookies the risk of a 3d printed cookie cutter is pretty minimal.
My wife did me a favor and soaked all my pla cookie cutters in super hot water to get them clean.
I print with PETG and run them through the dishwasher.
If I vapour smooth it with acetone, would be safe then?
How you gonna post that without the stl?
Here is your STL, thank you for your patience: https://www.thingiverse.com/thing:6376454
Thanks so much!
These might work better as a round cookie and using the cutter as an imprint. Then you can color in the important bits with icing.
please share the stl
Finally: https://www.thingiverse.com/thing:6376454
New Lemmy Post: Tasteful biscuits (https://lemmy.world/post/9315025)
Tagging: #3dprinting
(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md