Who here is making money 3D printing?
I am a hobbyist, and my job will probably never require me to design and print anything for work.
I do really enjoy the process of conceptualizing, designing, and printing, and have done so for myself and some close acquaintances.
I've spent many hours/days learning the tools of the trade and was wondering if there was an opportunity to make some money as a side gig. Has anyone been successful doing this, and how did you go about it?
Here are a couple of my early designs, I plan to upload more once I clean things up a bit.
It is illegal to counterfeit money, and my printer is resin, not paper or metal. So... no.
Get off Lemmy dad
Jokes on you. I'm on Kbin.
There's dozens of us
I love everything about this thread
Canada uses plastic money. Is it illegal to counterfeit another country's money? 🤔
Happened before. I can't find the story though. I think it was someone who showed up in Europe claiming to be a government official for a South American country. They commissioned printers to make a lot of currency notes. They vanished and it was discovered they weren't part of this countries' government.
Most US counterfeit US Bank Notes are printed in Colombia these days.
There's extradition laws. 🙂🙂
I tried, but we have paper based currency notes in my country and PLA notes were a dead giveaway, no shops accepted them sadly
You see, the pro move is to print a credit card. Plastic all the way!
I'll be damned!
Print Canadian currency—it actually is plastic these days. 😅
No my printer only eats money.
.. and poops out failed prints/spaghetti?
I never bothered with it but I'm sure you could. I just public domain everything I design since it's a lot of older automotive stuff and I'd rather it be readily available.
I can respect that. If it's something I've designed and made for my own use I make it freely available, but if someone I know comes to me asking, "hey is it possible to build X" then there should at least be a couple of beers in it
Oh yeah definitely commissions are a whole other ball game they should at least pay for the filament needed to R&D it and ideally do something for your time
I created one product (Frog Case) and people on Reddit were asking me to print it for them. Made a Shopify to make it easier and now I sell dozens of my original designs on there. (Frogcase.store)
Lately I make custom phone cases for the Galaxy Fold series
On average I make $300 a month, but highest sales month was $1k
When I see prices for 3D printing service it always looks unprofitable to me. People saying filament cost only 10$ means nothing to me. My time and knowledge, electricity, initial machine cost, maintainence, dealing with failures, postprocessing... then I see big printing farms...oh thats why! I just love it as a hobby 😄
3D modeling on the other hand can be super profitable
Because it's the harder skill, IMO. People find out I can print and start asking for really custom stuff, like all I have to do is picture it in my head and it will print.
I can draw a little in CAD, because that's part of my day job. But I don't know how to make a model of Mario dabbing.
I haven't sold anything but I've been seriously considering it after creating some RGB LED lamps. My main reservation is putting myself at risk by selling something that uses electricity to the general public. I'm sure the first moron who jambs a screwdriver into the powered leads and starts a fire will try to sue me.
If you’re just doing Etsy or eBay, don’t worry. Just put “at your own risk”
It if you’re going to do a whole branding thing, just get an LLC, or whatever the equivalent is if you’re outside of the US.
"Our hardsuits have kinetic barriers. Your level briefs don't, and I'm in a hurry."
Wow, yes that's definitely something to consider. Even if you put language in there like, "DO NOT PUT LEDS IN THIS OR GET IT NEAR ELECTRICITY, ONLY FOR DEMONSTRATION AND TRAINING" there's no way to prevent someone from suing you for any reason...
What you are describing is simply being a design engineer. That's what I do and I take on side projects once in a while. It's not worth my time to simply 3D print things for people. The printer is simply a tool used for prototyping.
How do you come across those side projects?
They sometimes find me. Friend of a friend knows someone who needs some stuff designed. That kind of thing.
I have made a total of $100 CAD over the course of... 5 months by selling a $10 plastic tool for strollers on Facebook marketplace. These were printed at my local library before I ever owned my own printer.
Now that I do own my own printer, I've just been enjoying printing very long prints that I couldn't at the library.
All that said, there are niche markets where you can fill a need and you can earn some slush fund money without taking on much stress.
This is exactly what I was thinking. Most of my designs are for very niche markets and hobbies, purely for enjoyment and to help people out.
I don't want to make it my full time job or anything, but $100 over 5 months would just about cover the cost of filament, so I'd be happy with that ;)
I think I could do an etsy shop and print video game props for people pretty profitably, but I'm afraid of turning a hobby into a job and sucking the fun out. I might try doing a really low volume just to have the occasional printer upgrade pay for itself.
You could just make a thing when you feel like it and throw it up for sale, that's my idea but tbh i haven't been able to keel my printer working throughout a single project so nothing ever gets done.
Ive made a little over a grand with my ender 3 making little display signs and stuff for local businesses.
How did you get this going? Were these business you frequented or did you do any marketing?
Yes, I make some money but barely enough to be worth it.
I sell some specially fixturing to my work. Sell them $30-50 each. Sold a dozen or so over the last 7 years and 3 printers.
Started selling on Etsy about a year ago and Xmas I made a decent amount very fast(about $500 in a month). After the new year it dropped to near nothing until recently I’m getting some sells. Everything I sold was my own designs, but it’s a race to the bottom on there. Far to many people stealing from Thingiverse and selling at a near loss. After Etsy takes its cut which can be a decent chunk your left with near nothing after materials and shipping. Expect $2 to $3 a hour of print time. I am barely in profit to be honest selling there.
The two most common ways to make money with a 3D printer: sell your own designs, like you're currently doing, or mass print trinkets/popular items. I suspect you have greater odds of making money in the second category, but I also suspect some people have made a decent amount of money in the first category.
Having such niche interests like I do is a double edge sword - there are always opportunities for you come up with something new and innovative, but the target market is also very limited.
I'm happy to stay in the first camp and design things that are helpful to these smaller communities, but I need some way to justify these long hours and miles of filament I put into development 😅
I totally hear you. I make things for me and usually just put them on thingiverse. It's rewarding to see people downloading and commenting on the prints and removes any worry about angry customers. I do wonder about leaving some $$ on the table though...
Not making any money with it but the 3D printer is helping us make money.
I'm working with a windows and door manufacturer that has around 80 employees.
The owner got a 3D printer that runs pretty continuously for at least 30% of the time I would say.
We are doing a lot of drill or assembly jigs with it. We are also sometimes doing assembly parts for custom projects.
Like someone really wants to make something's with weird angles or hardware that are not compatible together then we can throw a 3D printed part in it to make it work.
So I don't 3D print, and I just happened to come across this thread scrolling all, but on the flipside, is there a good way to commission someone to do smaller jobs? I embroider and the available floss bobbin options are a total suckfest. I would happily pay for some better ones, but I don't know how to even find someone to give my money to?
Pre-edit: I just realized I never actually answered your question. I honestly don't know how most people go about finding someone to design and prototype, but judging by some of the responses here I think we'll get some good advice. Feel free to contact me directly if you want me to look into the draft.
What has been super helpful to me iwhen people come to me with requests is to send me the most detailed diagrams or images of any currently available offerings or a combination of them so I have a good starting point.
As a specific example, someone asked me to design a handheld door lock retainer to practice lockpicking. The overall shape and ergonomic design were up to me, but this image was provided which included very specific measurements for the lock:
Thanks! I found a design on printables, now I just need someone to print me like...200 of them. Hallelujah, no more paying DMC for their crappy product that only kind of works.
If you can source an stl file or similar for what you want printed. For really small batches, there are people on Etsy who do commissions.
Check your local library system. One of mine has a 3d printer for use.
Getting a model printed is pretty straightforward. There are many online services where you can send a 3D model file and they mail you a print of it. The bigger challenge is the design. Paying a professional to design something for you is going to be very expensive. However, many 3D printing enthusiasts design their own models as a hobby and make them available for free. I would suggest looking on sites like printables and thingiverse for something that suits your needs. If you can find it there, then you can just send the file to a printing service and have it made. Other options would be spend time to learn modeling/design yourself, or find a kind person to do you a favor and design something custom for much less money than a professional would charge.
Thank you! I found pretty much exactly what I'm looking for on printables, so at least I have a starting point.
There are ppl on eBay who will print your stl file for you. I've had luck asking sellers who does their stuff.
I sew a bit so ik a small bit about bobbins and idk if a 3d printed one would work well or hold up.
It's not sewing thread bobbins, it's these - they're just a thin piece of plastic to start with, so I think 3D printing will work fine. They mostly just sit in a box or on a ring if I'm taking a project with me somewhere.
Oh yes those are super easy to design and print
I make money, but I produce entire products that use a 3D printed enclosure along with electronic components and code that I write. Just trying to sell something you printed seems like a terrible business plan.
I printed some stuff that I thought was cool and just put it up on Etsy early this year at a price that would be worthwhile for me. I was shocked when the first order came in as I never thought anyone would buy it. Then the orders kept coming in and I’ve grossed about 6k so far on Etsy. It’s nice that all of my hobby equipment and filaments are paid for and that’s all I’m looking for.
I continue to randomly list stuff that I think is cool. Sometimes they sell and sometimes they don’t and that’s fine. I don’t do SEO or research keywords or advertise. If I get bored of selling prints one day then I’ll just stop.
And printing is the least time consuming part of the process. It’s the packing and taking it to the post office that takes up the most time.
Not money as such, but being able to talk about printing made it easier to hang out with one of the production engineering teams at work - their Friday drinks are pretty fun, and the manager has a pretty liberal understanding of what "business expense" means
I design, print and sell accessories for filmmaking and Steadicam.
Do you have a website?
here is my shop
Thanks!
I made like €25 (revenue, not profit), does that count? Profit is in the negative.
That counts in my book! I'm sure the learning experience far outweighs any money you out into it
Your Thingiverse only has two over year old designs? How serious are you?
Yea, I am net positive with my 3d printing, that includes buying another printer. You have to remember that the raw material the 3d printers use is relatively cheap. I can print off something that costs me less than $1 per part, not including labor, electricity, etc, and still charge multiple times what it cost me to make. #d printing is basically a money making machine if you find the right niche and are decent at design.
Haha yep! There are actually several iterations on those models that have not yet been uploaded, as well as some commissioned work that I keep on a private share.
If I can make enough to offset the cost of my time and materials, I'm more than happy.
How did you get started with selling 3d prints? Where are you selling your things?
So what I sell is kind of a replacement part for a machine that usually wealthy people own. Sorry I know that's super vague. But anyways I redesigned as one part to make it custom and now I sell those custom parts. The website I use to sell them very specific to people who own these so if I had any advice I'd say get into a niche market.
Im making the filament vendors money does that count?
I print FDM. I've paid for the printers and make a little money each month. Not enough to live on but enough to finance the hobby.
My mom hooked me up with a teacher who wanted a watercolor insert for altoid tins. The lady was enthusiastic and would pay me every year to make them for all her classes. The design she pointed me to was a BSD license but I remade it anyway. I'd make like 100 prints at $5 each. Made like $500 X 4 years.
I haven't heard from her for two years. I don't know if she still teaching or found another printer.
I make some photographay related devices and give them away on printables/thingverse. For the most popular designs I mention that they are for sale on etsy. I know there are a lot of people interested in the things but without a 3d printer. I'm also not shy on mentioning my designs on social media if they are a solution to that person's photographic problem. On etsy I don't mention thingiverse/printables except for one disability related item. The etsy sales are about $120 a month.
I make a small amount of money selling my original designs as prints on etsy. It's not a lot, but thats how i want it so that it's manageable with my single printer. My goal is to get the etsy gig just big enough to 100% pay for this hobby.