This seems to be Linux's Microslop. Not only did they add it to Systemd, they banned users on Reddit for just talking about it. I laughed when Microsoft banned users for using the term Microslop. Not so funny now, I guess.

To be fair, timers are hard.

No build with AlpineJs is now the future. I've been saying for many years that creating a "hello world" page that generates tens or even hundreds of thousands of files is kind of nuts. Every one of those files could be a security issue.

I saw a video a while back where they routed audio through a banana, and nobody could pick out the audio that went through said banana. I can't find it, but here is a guy expanding on that video: https://www.youtube.com/watch?v=1fmCy686IC8

If banks were really serious about security, more of them would offer yubikey support. None of mine do, unless they just brought it online.

All programmers work for California now. They pass a stupid law, and we get to work on it. I guess this will just move our employer up the chain.

Dbeaver

I don't know, but that's kind of cool. It looks like with a driver, it will connect to MS Access. I still have to touch a legacy access database from time to time. Somewhere along the line, Access quit working over a RDP connection for me. I just wrote my own simple front end for it using .net, but the one thing I would like to do is kind of a pain for me to write. I could do it, I just don't want to. lol.

On the other hand, I don't mind getting a license for a good product just to support them, and it looks like the only options they have are subscription based. That leaves a bad taste in my mouth. I miss the good ol' days.

Anyway, thanks. Just installed the Linux ce version. It connected to MySQL and seems to do all the things I use Workbench for. So far, it's only asked me for my password when I connect to the database the first time!

It's offers a syntax similar to a no-build VUE. This gives you a more standard, modern way of doing things that a lot of people already know how to do. And it does it without generating many thousands of files and dependencies just to create a "hello world" page. Most anyone that could figure out VUE code should be able to look at AlpineJS code and figure out what is going on. I could very easily use vanilla JavaScript to do everything. Good luck on you figuring any of it out in a timely manner if you inherited any of the code.

I'm mostly doing database CRUD with it. I'm really impressed with how easy it is to make a somewhat complex form with a minimal amount of (mostly clean) code.

That said, I do not really like the inline coding that they push in all the documentation. I much prefer separating the code using Alpine data(). It's much easier to debug.

I dug up an article about it: https://www.zmescience.com/science/news-science/audiophile-banana-blind-test/

I can't remember the hosts name, but I did get asked to send my DL to a hosting service. I did a free trial and tried to sign up, at the end I was asked to send a picture of my DL. I told them I would find a host that knew what they were doing, and deleted my account. This was probably five or six years ago, too. I do agree though, no other host has tried to pull this on me.

OK, I just did some testing, and it was not exactly what I was expecting. For one, it's kind of hard to intentionally use a lot of memory. The best thing I found was opening a large amount of tabs in Firefox. I maybe could increase my swap space, but I never hung my system up. I shut down the vm and used about 18 gig of ram. I then started the vm.

The deal is, Stacer isn't exactly accurate when the VM starts. For some reason, memory usage (on Stacer) drops when the vm starts up. Checking the system resource monitor, memory usage briefly jumped to 28 gig in it. It never reflected this on Stacer. However, without the full 16 gig of ram allocated to the vm, Windows boots up, and then shuts back down after a brief period.

I stopped and started Windows numerous times. It would actually make Linux stutter as the memory maxed out, but it never froze up to the point I had to reboot to fix it.

The swap space did about max out during some of this. I do think I will increase the swap space a little.

I did finally get Cinnamon to restart one time. There were some minor issues, but it started back up and was usable for a few minutes. After that, it hung up so hard that only a reboot fixed it. One issue on restart was that the start menu was kind of wonky, like a web page that had lost its css file.

For anyone following this, I found the following link to be helpful.

https://askubuntu.com/questions/143838/how-do-i-restart-cinnamon-from-the-tty

It's pretty much a default install of Linux Mint, with Cinnamon. I haven't even installed that many programs, yet. Pretty much a vm, vscode, 4 browsers, gimp, and some small utilities.

I have a pc that's only a few months old, wiped, and with a pretty much default install of LM. I have 32 gig of ram. Unless there is something about Stacer I don't understand, it always shows half of the ram used (when I have the vm running). The graph never moves. I pretty much always have the vm running, because I absolutely have to have Windows with an IIS server on it (work related).

The entire system hangs. The only way I can recover is to reboot. The screen freezes, but the mouse pointer still moves around. I can click on things, but it does nothing. The keyboard does nothing.

I'm pretty bad about keeping a lot of tabs open in a couple of browsers. Almost every time it hangs involves opening a new tab in Firefox or Chromium. Sometimes youtube is involved, but I don't think every single time does.

Like I said, the last time it hung, I just happened to notice that the vm manager icon had disappeared from the menu bar, like it had exited when it hung. I'm going to check for that the next time it hangs.

Luckily, it only hangs about once every week or so. Lately, it has been going almost two weeks. It's really not that big a deal, but it would suck if it was doing it every few days.

Thanks,

I missed something. The only outages I have seen were in the Middle East, because the data centers were destroyed. That's kind of cool, in my opinion, because Bezos supports Trump. Ironic? Cool? Meh.

Have you checked dmesg (or historical system boot logs) and also ran memtest86+ to make sure your RAM isn’t faulty? Even if it’s brand new it can still happen. If you have another system nearby (or even just a phone) you could try to SSH (make sure to enable/start the daemon before it freezes) into the machine and see if it’s still responsive.

I have poked around in logs a little. Nothing has jumped out at me. I'll test the memory and turn SSH on. I used Ubuntu on the desktop for about 8 - 10 years, and then swapped back to Windows ~2018 for work. I used to mess with hardware a lot, but I've fried my brain programming for too many years now.

I do see reports of Linux Mint hanging with nothing but the mouse working, but nothing has jumped out at me as a fix. The reports are going back a while, too. A lot of comments say it is something with the graphics card.

My new pc is a: HP OmniDesk Desktop Computer PC, AMD Ryzen 7 8700G, 32GB DDR5 Memory, 1TB NVMe SSD, Radeon 780M Graphics

Outside of this one issue, it's a beast with Linux on it (I'm not a gamer, though). I bought it right before RAM prices jacked the prices of everything up.

So, it just froze on me about 10 minutes ago. I can drop to the console. The vm manager icon did not disappear from the menu bar, so I was wrong about that. Everything freezes. I cannot interact with any browser or any app. The mouse pointer did change from a pointer to hand over a link or something at one point, but never changed back. After dropping to the console, I eventually just had to reboot and restart everything. The best way to describe it is, someone replaced my desktop with an image, and the only thing that still works is moving the mouse around.

I'm thinking it's been about a week or so since it did this last. Oh, and I was poking around on a web page when it did it. Web browsers are always involved, but not specifically any one browser.

Ugh. It took me a couple of weeks to everything I needed working on this pc. If I have to reboot every week or two, not that big a deal.

I did try and restart my desktop, but it failed. I don't think I did it right. I found some instructions specific to Cinnamon. I will try them next time.

I still think it possibly has something to do with either video or memory. It isn't every single time, but no small number of times it freezes, I am doing something on youtube, and then open a new tab in either Firefox or Chromium. It's like moving that video to the background or opening that new tab went over a limit with memory. I was sure it was videos, but then I have done it a few times with no videos going. For sure, it always involves a browser, but that's because I work on web pages all day long and that's what I'm always using. Still, it's never done it when I'm in any other program.

So, I had a version of Win10 that apparently didn't have .Net 3.5 Framework on it. It took an act of congress to get it to install. I eventually found a version of 4.x that included 3.5 in it. This installed.

I don't understand how I could have that much trouble with one of Microsoft's flagship products. Also, I could dig up programs I used on Windows 3.1 that would probably still run today. I get that things get old, but .Net 3.5 is not that old, at least compared to something that would run on Windows 3.1.

It bugs me that they think everyone can just move everything to the next .Net version every time one rolls out.

Man, it wasn't that long ago that I worked at a place that still has a classic ASP web page running.

That question has a lot of ways to go in. A swap file on Linux or Windows running in my vm? Also, I have a new PC with 32 gig of RAM. I allocated half to the vm when it is running. This kind of brings me to why I asked this question to begin with. I have Stacer installed and I've never seen my memory usage go over halfway (Stacer graph) when I have the vm running. I pretty much always have my vm running, because I need it running. I shouldn't be running out of memory. If it shows my 16ish gigs of ram used when the vm is fired up, then I should have 16ish gigs of ram that I've never seen being used.

I really wouldn't think the vm is running out of memory. There is 16 gig allocated and all it has running is IIS server, VisualStudio, and Firefox. I rarely open much more than that on it. I never browse on Windows' Firefox. It's just open because VisualStudio opens a browser while I'm debugging. At most, the only other programs running on the vm are File Manager and Notepad.

If I close the vm, Stacer shows my memory usage at 11 Gig. That means the vm should be using close to 6ish gig when it is fired up (according to Stacer).

Note: Yeah, I'm not able to check Stacer after it hangs up. I do spot checks with it from time to time. Like I said, about 50% of the ram is being used when my vm is fired up. No matter what I'm doing, I've never seen more than that used.

Thanks,