I recently reinstalled my nixos (long story). but for some reason, tailscale refuses to install. when i reinstalled, i just copied over my configuration.nix to replace the default one from the install (not sure if that is part of the problem?). or maybe its just broken right now, and i need to wait it out?

...

ok tailscale.com/net/tstun 0.034s

ok tailscale.com/packages/deb 0.028s

--- FAIL: TestGetList (0.00s)

portlist_test.go:19: seek /proc/net/tcp: illegal seek

--- FAIL: TestIgnoreLocallyBoundPorts (0.00s)

portlist_test.go:40: seek /proc/net/tcp: illegal seek

--- FAIL: TestPoller (0.00s)

portlist_test.go:61: seek /proc/net/tcp: illegal seek

FAIL

FAIL tailscale.com/portlist 0.016s

FAIL

error: builder for '/nix/store/18r5bq5bx8n79mgpv69mnfjq8w7z05b0-tailscale-1.82.5.drv' failed with exit code 1

error: 1 dependencies of derivation '/nix/store/pd0225japsibj036hgfzj48q960wx8k4-system-generators.drv' failed to build

error: 1 dependencies of derivation '/nix/store/572pg1xc24wdd01v7cyvvrdijn7qb20y-system-path.drv' failed to build

error: 1 dependencies of derivation '/nix/store/hln81111gkd51fzm7napkb40wd3rx9ig-nixos-system-wwt-25.05.809261.7c815e513adb.drv' failed to build

added xkcd to my rss feed and this is the text on all the posts lol

I recently switched from a pixel 6 to a fairphone 5. There was stuff like a smart screenshot (which worked half the time) and the ability to select text most of the time. The fairphone doesnt have that, and i wonder if its a first party google feature, or if theres a different rom i should use.

I have a program that I wrote, maybe I didn't package it appropriately, but I cannot got it to run. I wrote it on a manjaro install, and tested it on another manjaro install, both were fine. I packaged it with poetry and copied the wheel over.

Today I tried to install it on my nixos surface tablet I use at work. I get this error on installation:

Traceback (most recent call last):                                            File "/home/gzuh/.local/bin/willcallgui", line 5, in <module>
    from willcallgui import willcallgui
  File "/home/gzuh/.local/share/pipx/venvs/willcallgui/lib/python3.11/site-packages/willcallgui/willcallgui.py", line 12, in <module>
    import tkinter as tk
  File "/nix/store/h723hb9m43lybmvfxkk6n7j4v664qy7b-python3-3.11.9/lib/python3.11/tkinter/__init__.py", line 38, in <module>
    import _tkinter # If this fails your Python may not be configured for Tk
    ^^^^^^^^^^^^^^^
ModuleNotFoundError: No module named '_tkinter'

These are the packages i have installed... I'm trying to install it with pipx...

environment.systemPackages = with pkgs; [
    vim
    wget
    screen
    google-chrome
    openssh
    blackbox-terminal
    tailscale
    gnome.gnome-tweaks
    imagemagick
    git
    python311Full
    python311Packages.tkinter
    python311Packages.pip
    python311Packages.pipx

  ];

What am i missing?

I'm working on a python program, and i need to sync the results to an ipad as a todo list (with checkboxes)

I had been using google keep, and manually copying /pasting the data over from my cli based app. I will be out of the country for 2 weeks, so im updating my software to no longer being cli, and ideally syncing the final list to google keep or something similar, since someone else will be running the software. You know how normies get when they see a terminal window..

tried this googlekeepapi thing i found online, but the authentication was very complicated and i couldn't get it to work. There is no specific reason we need to use google keep, was just the first thing that came to mind when we set this system up, and it works well and is cloud based.

Do yall know of any service where i can programmatically generate checkbox lists, and sync them over the web?

I should note i do not have a server available to self host. could potentially spin something up locally with a raspberry pi, but would prefer not to have another potential point of failure.

I'm working on a python program, and i need to sync the results to an ipad as a todo list (with checkboxes)

I had been using google keep, and manually copying /pasting the data over from my cli based app.

I will be out of the country for 2 weeks, so im updating my software to no longer being cli, and ideally syncing the final list to google keep or something similar, since someone else will be running the software. You know how normies get when they see a terminal window...

I tried this googlekeepapi thing i found online, but the authentication was very complicated and i couldn't get it to work. There is no specific reason we need to use google keep, was just the first thing that came to mind when we set this system up, and it works well and is cloud based.

Do yall know of any service where i can programmatically generate checkbox lists, and sync them over the web?

I should note i do not have a server available to self host. I could potentially spin something up locally with a raspberry pi, but would prefer not to have another potential point of failure.

Funny and informative

I just got a cidooo v21 numpad, and was very excited to use macros for OBS.

I have been using alt-z for tap-to-talk in obs, and i set up layer 3 to be obs macros. I want "enter" to be tap to talk ie alt-z. When i press the enter key and keep it held, it only registers as a short tap. I even made sure the macro is set for keydown on both keys.

Whats the simplest way to have the macro report as held for the duration of me holding the enter key?

Edit: potential alternate solution: whats the best way to have different macros for the press and release of the enter key? That way i could simply unmute on press and mute on release

I have a client with locally hosted security cameras. There is a DVR box that has a port open and a 3rd party app you can view the cameras from. Traditionally we have been forwarding the port to the WAN via the router there. Its a restaraunt btw.

When the ISP upgrades the router every few years there's a huge headache trying to get the ports back open and bridging the modem and router blah blah blah. Not only this, even though they are supposed to have a static wan ip, it does change from time to time.

What i would like to do is plug in a raspberry pi on the network and forward the DVR's ports somewhere accessable.

Im thinking of something along the lines of wireguard, but just for a single ip/port that i can tunnel over ngrok. Seems doable but i'm having trouble finding the proper terms to google. Port forwarding generally brings up router config, and tunnelling seems to expect you to be on the device who's ports you wish to access.

Any advice?

Beth Gibbons has announced a new solo record, so I gave this album a listen

I am trying to setup a wireguard server on freebsd using this guide. the only thing i've done different is make the AllowedIPs 0.0.0.0/0

I seem to have messed something up because when I have wireguard running, i cannot ping or curl anything from the server. It doesn't take down the machine though, I am still able to ssh into the server.

I still have yet to get the client to actually connect, but i assume this networking issue is a potential cause. googling doesn't seem to help me find anyone with my same issue.

my wg0.conf is as follows

[Interface] Address = 10.96.100.1/32 # address the server will bind to

ListenPort = 51820 # listener port

PrivateKey = [redacted]

[Peer] #phone

AllowedIPs = 0.0.0.0/0

PreSharedKey = [redacted]

PublicKey = [redacted]

This happening to yall too? /c/[email protected]