I keep Linux and windows on separate disks, grub or windows boot manager don't know about each other. I have the Linux disk as the primary boot, if I need to boot into windows i use the bios boot selection screen. It's a bit of a pain at times(have to mash F12 to get the bios boot menu) bit it's less of a headache than trying to fix grub

Interesting posts you have there I also have also tired github.io pages (https://jackdavies.github.io) I've had it rattling around for a while post to it now and again. I want to use it more (still learning how to use its quite basic and probably broken in places) I've got some more projects/posts I want to put on it but currently updating the whole thing to separate posts/projects and improve the overall look and feel. Often struggle with time and motivation to work on it though

I use the spreadsheet to hold dimensions/variable and formulas, makes it easier to modify designs. If I want to change a length, hole size height etc just change the spreadsheet values don't have to mess around with the sketches or 3d part designs directly.

One slightly frustrating thing i found is sometimes it fails to recompute the design or processes it incorrectly when values are changed by large amounts, that's probably more to do with how I design things though

I have considered adding windows to grub, but these days I hardly boot into windows so there is probably not much point.

That's strange, are you using Hugo to generate the site? I am currently using jekyll, it seems to put the full post into RSS content field and the summary text used on the home page in the RSS summary field. I have tried Hugo in the past and might switch to it, haven't tested its RSS generation though

Thanks for the tips, I'll have a look at namecheap, I had the domain I've used rattling around for a while and wanted to do something with it

I'll probably do something similar to that setup in the future, this was a quick fix

I have updated the post to use example.com

Thanks. It's a shame personal blogs are dieing off, although I have seen a bit if a resurgence of them since github io pages have been a thing. I have also found that people use mastodon a lot to microblog/provide updates to new posts on their personal sites so there is hope I'VE updated the RSS link so it's at the top as well so its easier to find

freedns.afraid.org is the site you use to manage the dynamic DNS twilightparadox is the default free option for creation DNS records on that comes so I used that as an example

I'm not sure which reference you are referring to, twilightparadox.com is a domain on the dynamic DNS service, mysub is also an example

I have seen both issues, when the sketcher starts to play up sometime I add more constraints to try to "anchor" a tangent in a certain direction but it can make the sketch messy The most reliable way I've found to stop it is small incremental changes e.g. say I want the length of a part to change my 40mm I'll change the size in 5mm increments allowing FC to recompute the model between each step. It's fiddly and frustrating but I can live with it, once you get to understand it's quirks Freecad can be very useful