Can someone help me identify this potentiometer from a third party Xbox controller?
Trying to repair a Hyperkin Duke Xbox controller where the left trigger doesn't respond. Found that the resistance of this potentiometer doesn't change when it's moved, so I'm looking to replace it. I'm a novice with this stuff though and I'm having trouble identifying it. Any help is appreciated.
6 replies
Are sure you're measuring across the correct terminals? The resistance between the two terminals of the resistive portion is constant. I would expect the resistance of a failed pot to either be zero or infinite
It might not even be a potentiometer, more likely an encoder
There's a test pad on the PCB labeled "LT" (left trigger). I used that and compared it's resistance to ground to that of the right trigger's test pad. I got about 6-10k ohms on the working one (right trigger), and 3.9-4.4 on this one.
How many pins does it have in the circuit board?
Someone said it might be an encoder but I see "103" on it which is used on potentiometers to indicate 10k ohm (10 x 10^3)
It has 3 pins, and I found that it's a linear (B), 10k ohm (130, as you said), potentiometer. I found similar ones, but the 9 and 5 at the top concern me. The others that I found have a 60 and a 6 there instead.
Linear checks out for this kind of application.
Potentiometers are pretty basic things. About the only thing I can think of that would be specified electrically is value (10k), wattage rating (but I doubt much current is sent through these in this application), linear/logarithmic taper, tolerance (often 5%, or 10%) and maybe the type of contact/track or something (probably doesn't matter).
Those numbers could be manufactured date or lot codes or similar.
How does the thumb "wheel" attach? Or is it built in? I can't tell from the single pic.
Other things to consider are the pin spacing and physical dimensions.