Spyke

Syndicated from the fediverse. Read and engage on the original instance.

View original on piefed.zip

Serial over Ethernet with HA

I just picked up a 4K commercial display to upgrade my TV for cheap. It has an RS232C port on the back for control, and Home Assistant has a native integration to control it via a local Linux tty. The hitch is that my Home Assistant server is located in a spot not near the television, and running physical serial line to it would be inconvenient. But, since I have a Raspberry Pi connected as the streaming media box, I should be able to plug a USB adapter into it and route the serial data over the network, right?

Is there a a good way to do this in HAOS?

View original on piefed.zip
21

8 replies

piefed.zip

Thanks! I've got the TV end covered, the issue is at the HAOS end. The LG serial TV integration talks to a Linux device node (e.g. /dev/ttyUSB0), so the issue is stuffing the TCP stream back into a pty.

2
lemmy.ca

That’s what they’re saying - you can use an ESP32 device as a serial proxy without having to do anything special. If you already have a device attached to it you could use the socket:/… syntax below.

Per the integration documentation:

Port

The serial port the TV is connected to. This can be a local device path or a remote serial proxy URL. For example, /dev/ttyUSB0 (USB adapter), socket://192.168.1.100:2000(network proxy), or socket://esphome-device.local:6638 (ESPHome).

10

Oh, nice, thanks!

(Oddly, the documentation that came up when I looked didn't mention the socket options.)

2
lemmy.world

As mentioned by CondorWonder, the LG via Serial HA Integration can already connect to a TCP socket instead of a TTY device.

If you want to use your Raspberry Pi as the serial proxy server, there's tons of options. To recommend something kinda modern, I'd put a systemd service on your raspberry pi which starts netcat on a stty, see https://stackoverflow.com/a/71173551/2232127 as an example.

5
fonix232reply
fedia.io

I think even a simple ESP32 would serve well as a serial to TCP adapter. And it's considerably cheaper.

3

Well since the Pi is already there and has a serial interface, getting an ESP32 is still more expensive :)

2

Thanks! I see now that HA documentation just assumes that one knows that one can use the URL schema to specify the "port, " without saying so. iYKYK, I guess.

1

You reached the end

Serial over Ethernet with HA | Spyke